整机热变形中测温点优化选择方法的研究
|
摘要
在高速高精度机床的加工过程中,由于各种热源的作用会导致机床产生热变形,从而影响其加工精度。针对整机热变形误差是影响机床加工精度的最大误差源,提出采用模糊聚类分析法对测温点进行优化选择,并利用多元线性回归方法建立整机热变形与温度之间的数学模型。结果表明,经优化后的温度变量应用到热误差模型中能够有效的预测整机的热变形,并且补偿效果很好。
In the procedure of machining by high-speed and high-precise machine tools,because of the function of many heat sources,the machine tools produce thermal deformation,w hich affects the processing precision.According to the compound machining center thermal deformation error is the biggest error source of affecting the machining precision of machine tools,the fuzzy group analysis method is adopted to select the optimized temperature measurement points,and using multivariate linear regression analysis method to establish the mathematical model of thermal deformation error and temperature field. The results show that the application of the optimized temperature variable to thermal error model can effectively predict the thermal deformation of the compound machining center,and the effect of the compensation is satisfactory.
In the procedure of machining by high-speed and high-precise machine tools,because of the function of many heat sources,the machine tools produce thermal deformation,w hich affects the processing precision.According to the compound machining center thermal deformation error is the biggest error source of affecting the machining precision of machine tools,the fuzzy group analysis method is adopted to select the optimized temperature measurement points,and using multivariate linear regression analysis method to establish the mathematical model of thermal deformation error and temperature field. The results show that the application of the optimized temperature variable to thermal error model can effectively predict the thermal deformation of the compound machining center,and the effect of the compensation is satisfactory.
引文
[1]傅建中,等.数控机床热误差补偿技术的发展状况[J].航空制造技术,2010(4):478-480.
[2]范金梅,许黎明,赵晓明,等.机床热误差补偿中温度传感器布置策略的研究[J].仪器仪表学报,2005(8):83-84.
[3]倪军.数控机床热误差补偿研究的回顾及展望[J].中国机械工程,1997(1):83-84.
[4]鲁远栋,等.数控机床热变形误差研究及补偿应用[J].制造技术与机床,2007(4):37-39.
[5]陈征,狄瑞坤.关于机床热关键点的辨识问题的研究现状分析[J].组合机床与自动化加工技术,2004(2):33-34.
[6]刘立柱.概率与模糊信息论及其应用[M].北京:国防工业出版社,2004.
[7]杨建国,邓卫国,任永强,等.机床热补偿中温度变量分组优化建模[J].中国机械工程,2004(3):478-480.
[8]胡国定,张润楚.多元数据分析法-纯代数处理[M].天津:南开大学出版社,1900.
[2]范金梅,许黎明,赵晓明,等.机床热误差补偿中温度传感器布置策略的研究[J].仪器仪表学报,2005(8):83-84.
[3]倪军.数控机床热误差补偿研究的回顾及展望[J].中国机械工程,1997(1):83-84.
[4]鲁远栋,等.数控机床热变形误差研究及补偿应用[J].制造技术与机床,2007(4):37-39.
[5]陈征,狄瑞坤.关于机床热关键点的辨识问题的研究现状分析[J].组合机床与自动化加工技术,2004(2):33-34.
[6]刘立柱.概率与模糊信息论及其应用[M].北京:国防工业出版社,2004.
[7]杨建国,邓卫国,任永强,等.机床热补偿中温度变量分组优化建模[J].中国机械工程,2004(3):478-480.
[8]胡国定,张润楚.多元数据分析法-纯代数处理[M].天津:南开大学出版社,1900.