摘要
对锤刀式湿煤破碎机的筛板、破碎部件、密封件、刮煤装置、机身等进行技术改造,可解决机器运行时有异响、机身晃动、煤样撒漏、破碎效率低、粉尘量大、机器易堵塞等问题。通过改造前后的制样精密度对比可知,改造锤刀式湿煤破碎机后可提高制样的准确度并解决煤样堵塞的问题,确保煤样顺利通过破碎筛分系统,可提升筛分效果和破碎效率并避免残留煤样互相污染。
The technological reformation on parts of knife type wet coal crushing machine such as sieve plate,crushing parts,seals,coal scraping device,machine body was done,the problems like different ringing during operation,machine body shaking,coal sample leakage,low crushing efficiency, large amount of dust, machine blockage could be solved. Through the comparison of sample preparation precision before and after reformation,after reformation of knife type wet coal crushing machine,the sample preparation accuracy could be improved,and the block of coal sample could be solved,therefore,the coal sample could get through the crushing and screening system smoothly,the screening effect and crushing effect could be improved,and the contamination of sample with each other could be avoided.
引文
[1]谭建军,张冬练.全自动制样系统在煤炭制样中的应用浅探[J].煤质技术,2014(S1):40-41.
[2]何文莉. HMZZX环保型无人值守煤炭联合制样系统研发[J].煤质技术,2015(2):19-22.
[3]张景生.基于煤炭制样环境的智能除尘系统研究[D].长沙:湖南科技大学,2013:1-63.
[4]何文莉,皮中原,姜英.《煤炭联合制样系统技术条件》国家标准的研究与制定[J].煤质技术,2015(1):61-65.
[5]王晓强,袁晓鹰.机器人集成技术在煤炭制样中的应用[J].煤质技术,2016(4):20-22.
[6]孔祥传,孙江南.煤、矿石制样系统中定比缩分机的设计应用[J].科技博览,2012(1):20.
[7]赵小锋,王兴无.全自动无人值守煤炭机械化智能制样系统在电力行业应用现状及分析[J].江西电力,2016(6):23-25.
[8]王兴无.煤炭自动制样系统[J].热力发电,2015(7):111-113.
[9]赵东敏.用制样和化验方差核验法控制煤炭制样质量[J].煤炭加工与综合利用,2016(3):53-55.
[10]侍云贵.电厂煤炭采制样系统及运行问题分析[J].安徽电气工程职业技术学院学报,2005,10(1):62-65.
[11]周青,李小江.影响煤炭联合制样设备制样偏差的因素及其检验方法[J].热力发电,2011(5):30-34.