二元伯醇对活性染料墨水理化性能的影响
|
摘要
选用乙二醇、1,3-丙二醇、1,4-丁二醇、1,5-戊二醇4种不同结构的二元伯醇,探讨其对于活性染料溶液K/S值、固色率、稳定性以及保湿性的影响。结果表明,二元伯醇的种类和用量对活性染料墨水的理化性能影响较大,在同等染色条件下,1,3-丙二醇对染色结果的影响最小,K/S值和固色率达到26.97和63%,乙二醇的保湿性最明显,且对墨水稳定性的影响最小。
Ethylene glycol, 1,3-propanediol, 1,4-butanediol and 1,5-pentanediol are selected to study their effects on K/S value, fixation rate, stability and moisture retention of reactive dye solution. The results show that the type and amount of primary diatomic alcohol have a great influence on the physical and chemical properties of reactive dye ink. Under the same dyeing conditions, 1,3-propanediol has the least influence on the dyeing results, and K/S value and fixation rate are26.97 and 63%. Ethylene glycol has the best moisture retention and has the least influence on the stability of the ink.
Ethylene glycol, 1,3-propanediol, 1,4-butanediol and 1,5-pentanediol are selected to study their effects on K/S value, fixation rate, stability and moisture retention of reactive dye solution. The results show that the type and amount of primary diatomic alcohol have a great influence on the physical and chemical properties of reactive dye ink. Under the same dyeing conditions, 1,3-propanediol has the least influence on the dyeing results, and K/S value and fixation rate are26.97 and 63%. Ethylene glycol has the best moisture retention and has the least influence on the stability of the ink.
引文
[1]李文燕,谭艳君,霍倩,等.提高数码印花活性墨水的稳定性[J].印染,2008,34(1):10-14.
[2]马学功,周兴叶,何剑雄.刍议纺织品数码印花技术[J].印染,2014,40(18):48-55.
[3]许增慧,沈莉萍,李翠萍,等.数码喷墨印花墨水的研究现状与发展趋势[J].印染助剂,2013,30(1):1-4.
[4]许秋生,屠天民,柯林刚.喷墨印花技术应用与活性墨水的配制[J].印染,2009,35(3):1-4.
[5]项伟,杨宏林,陈光杰.再生活性黑墨水的配制及性能[J].印染,2014,40(10):14-17.
[6]张艳,郝龙云,蔡玉青,等.喷墨印花用液态活性染料稳定性研究[J].染料与染色,2006,43(6):8-11.
[7]胡元元,郝龙云,蔡玉青,等.有机溶剂对活性染料墨水稳定性的影响[J].染整技术,2008,30(6):5-9.
[8]杭彩云.乙醇/水体系中活性翠蓝H-A的染色性能[J].印染,2018,44(20):7-11.
[9]付少海,关玉,吴敏,等.纺织品喷墨印花墨水的研究进展[J].纺织导报,2012(4):38-41.
[10]郭润兰,艾宏玲.影响喷墨印花固色率的因素[J].印染,2006,32(14):9-11.
[11]张登陆,付少海,房宽峻,等.多元醇对分散染料喷印墨水性能的影响[J].印染,2007,33(11):4-6.
[12]那世煜,张庆.酸性染料喷墨印花墨水的喷射流畅性[J].印染,2008,34(23):4-7.
[13]金雅,王俊丽,朱泉.初探纺织品喷墨印花墨水的性能影响因素[J].印染,2006,32(22):8-10.
[2]马学功,周兴叶,何剑雄.刍议纺织品数码印花技术[J].印染,2014,40(18):48-55.
[3]许增慧,沈莉萍,李翠萍,等.数码喷墨印花墨水的研究现状与发展趋势[J].印染助剂,2013,30(1):1-4.
[4]许秋生,屠天民,柯林刚.喷墨印花技术应用与活性墨水的配制[J].印染,2009,35(3):1-4.
[5]项伟,杨宏林,陈光杰.再生活性黑墨水的配制及性能[J].印染,2014,40(10):14-17.
[6]张艳,郝龙云,蔡玉青,等.喷墨印花用液态活性染料稳定性研究[J].染料与染色,2006,43(6):8-11.
[7]胡元元,郝龙云,蔡玉青,等.有机溶剂对活性染料墨水稳定性的影响[J].染整技术,2008,30(6):5-9.
[8]杭彩云.乙醇/水体系中活性翠蓝H-A的染色性能[J].印染,2018,44(20):7-11.
[9]付少海,关玉,吴敏,等.纺织品喷墨印花墨水的研究进展[J].纺织导报,2012(4):38-41.
[10]郭润兰,艾宏玲.影响喷墨印花固色率的因素[J].印染,2006,32(14):9-11.
[11]张登陆,付少海,房宽峻,等.多元醇对分散染料喷印墨水性能的影响[J].印染,2007,33(11):4-6.
[12]那世煜,张庆.酸性染料喷墨印花墨水的喷射流畅性[J].印染,2008,34(23):4-7.
[13]金雅,王俊丽,朱泉.初探纺织品喷墨印花墨水的性能影响因素[J].印染,2006,32(22):8-10.