大塑性变形制备超细晶铝锂合金的组织及力学性能研究进展（英文）
|
摘要
综述了大塑性变形工艺制备超细晶铝锂合金的显微组织及其力学性能,分析了大塑性变形过程中铝锂合金的组织演变及其影响因素。铝锂合金的强化机制主要是基于析出强化,结合大塑性变形得到的超细晶粒组织可以显著提高强度和塑性,并得到优异的超塑性。表明大塑性变形加工铝锂合金,尤其是等通道挤压制备的超细晶铝镁锂合金在超塑性工业具有广阔的发展前景。
This review reveals microstructure and mechanical properties of Al-Li alloys produced by SPD(severe plastic deformation) techniques. It focuses on the microstructure evolution during SPD, with the influence of internal and external factors. The strengthening mechanism of Al-Li alloy, mainly based on precipitation hardening, is presented. It is demonstrated that UFG(bulk ultrafine-grained) Al-Li may attain enhanced strength with relatively good ductility via grain refinement and multiple precipitates. Special attention is given to the superplasticity of UFG Al-Li alloys, especially to the high strain rate superplasticity(HSR SP). It suggests that UFG Al-Mg-Li alloy produced by SPD, particularly by equal-channel angular pressing(ECAP), is a promising candidate material for use in superplastic forming operations.
This review reveals microstructure and mechanical properties of Al-Li alloys produced by SPD(severe plastic deformation) techniques. It focuses on the microstructure evolution during SPD, with the influence of internal and external factors. The strengthening mechanism of Al-Li alloy, mainly based on precipitation hardening, is presented. It is demonstrated that UFG(bulk ultrafine-grained) Al-Li may attain enhanced strength with relatively good ductility via grain refinement and multiple precipitates. Special attention is given to the superplasticity of UFG Al-Li alloys, especially to the high strain rate superplasticity(HSR SP). It suggests that UFG Al-Mg-Li alloy produced by SPD, particularly by equal-channel angular pressing(ECAP), is a promising candidate material for use in superplastic forming operations.
引文
1 Lavernia E J,Grant N J.Journal of Materials Science[J],1987,22:1521
2 Williams J C,Starke Jr E A.Acta Materialia[J],2003,51:5775
3 Rioja R J,Liu J.Metallurgical and Materials Transactions A[J],2012,43A:3325
4 Rioja R J.Materials Science and Engineering A[J],1998,257:l00
5 Furukawa M,Iwahashi Y,Horita Z et al.Acta Materialia[J],1997,45(11):4751
6 Munoz-Morris M A,Morris D G.Script Materialia[J],2010,63:304
7 Furukawa M,Berbon P B,Horita Z et al.Metallurgical and Metarials Transactions A[J],1998,29A:170
8 Wang Z C,Prangnell P B.Materials Science and Engineering A[J],2002,328:87
9 Markushev M V,Bampton C C,Murashkin M Y et al.Materials Science and Engineering A[J],1997,234-236:927
10 Sabirov I,Murashkin M Y,Valiev R Z.Materials Science and Engineering A[J],2013,560:1
11 Huang X,Kamikawa N,Hansen N.Materials Science and Engineering A[J],2008,483-484:102
12 Langdon T G.Acta Materialia[J],2013,61:7035
13 Jiang J H,Shi J,Yao Y H et al.Journal of Materials Engineering and Performance[J],2015,24(5):2016
14 Alvandi H,Farmanesh K.Procedia Materials Science[J],2015,11:17
15 Liu M P,Hans J R,Liu X T et al.Journal of Materials Science[J],2010,45(17):4659
16 Prangnell P B,Bowen J R,Apps P J.Materials Science and Engineering A[J],2004,375-377:178
17 Valiev R Z,Langdon T G.Progress in Materials Science[J],2006,51:881
18 Kaibyshev R,Shipilova K,Musin F.Materials Science and Engineering A[J],2005,396:341
19 Mazilkin A A,Myshlyaev M M.Journal of Materials Science[J],2006,41:3767
20 Adamczyk-Cieslak B,Mizera J,Kurzyd?owski K J.Materials Science and Engineering A[J],2010,527:4716
21 Munoz-Morris M A,Morris D G.Materials Science and Engineering A[J],2011,528:3445
22 Ma A B,Suzuki K,Nishida Y et al.Acta Materialia[J],2005,53:211
23 Kun X W,Wei W,Du Q B et al.Materials Science and Engineering A[J],2009,525:55
24 Yuan Y C,Ma A B,Gou X F et al.Materials Science and Engineering A[J],2016,677:125
25 Alizadeh R,Mahmudi R,Pereira P H R et al.Materials Science and Engineering A[J],2017,682:577
26 Zhang L Y,Ma A B,Jiang J H et al.Advanced Materials Research[J],2015,1095:942
27 Zhang P,Ma A B,Lu S et al.Materials&Design[J],2011,32:348
28 Kral P,Dvorak J,Blum W et al.Materials Characterization[J],2016,116:84
29 Musin F,Kaibyshev R,Motohashi Y et al.Materials Transactions[J],2002,43:2370
30 Yang Y,Ma F,Hu H B et al.Materials Science and Engineering A[J],2014,606:299
31 Islamgaliev R K,Yunusova N F,Valiev R Z.Scripta Materialia[J],2003,49:467
32 Zhu Z X,Han J,Gao C et al.Materials Science and Engineering A[J],2017,681:65
33 Wongsa-Ngam J,Kawasaki M,Langdon T G.Journal of Material Science[J],2013,48:4653
34 Ovri H,Lilleodden E T.Acta Materialia[J],2015,89:88
35 Truong C T,Kabisch O,Gille W et al.Materials Chemistry and Physics[J],2002,73:268
36 Gault B,Cui X Y,Moody M P et al.Scripta Materialia[J],2012,66:903
37 Yoshimura R,Konno T J,Abe E et al.Acta Materialia[J],2003,51:2891
38 Lavernia E J,Srivatsan T S,Mohamed F A.Journal of Materials Science[J],1990,25:1137
39 Deng Y L,Yang J L,Li S Y et al.Transactions of Nonferrous Metals Society of China[J],2014,24:1653
40 Ott N,Yan Y M,Ramamurthy S et al.Scripta Materialia[J],2016,119:17
41 Noble B,Bray S E.Acta Materialia[J],1998,46:61
42 Decreus B,Deschamps A,Geuser F D et al.Acta Materialia[J],2013,61:2207
43 Murken1 J,H?hner R,Skrotzki B.Materials Science and Engineering A[J],2003,363:159
44 Deschamps A,Sigli C,Mourey T et al.Acta Materialia[J],2012,60:1917
45 Kim J M,Seong K D,Jun J H et al.Journal of Alloys and Compounds[J],2007,434-435:324
46 Gao C,Zhu Z,Han J et al.Materials Science and Engineering A[J],2015,639:489
47 Dorin T,Geuser F D,Lefebvre W et al.Materials Science and Engineering A[J],2014,605:119
48 Deschamps A,Garcia M,Chevy J et al.Acta Materialia[J],2017,122:32
49 Mu?oz-Morris M A,Gutierrez-Urrutia I,Galderon N et al.Materials Science and Engineering A[J],2008,492:268
50 Courtney T H.Mechanical Behavior of Materials[M].Beijing:China Machine Press,2004:181,325
51 Zha M,Li Y J,Mathiesen R H et al.Scripta Materialia[J],2015,105:22
52 Zha M,Li Y J,Mathiesen R H et al.Acta Materialia[J],2015,84:42
53 Han J,Zhu Z X,Li H J et al.Materials Science&Engineering A[J],2016,651:435
54 Cabibbo M.Materials Characterization[J],2012,68:7
55 Lee S W,Horita Z,Hirosawa S et al.Materials Science and Engineering A[J],2012,546:82
56 Deschamps A,Decreus B,Geuser F D et al.Acta Materialia[J],2013,61:4010
57 Liu S M,Wang Z G.Scripta Materialia[J],2003,48:1421
58 Li H P,Ye L Y,Zhang P et al.Transactions of Nonferrous Metals Society of China[J],2014,24:2079
59 Zhang X M,Zheng D W,Ye L Y et al.Journal of Central South University and Technology[J],2010,17:659
60 Hales S J,Mcnelley T R,Munro I G.Scripta Metallurgica[J],1989,23:967
61 Ye L Y,Zhang X M,Zheng D W et al.Journal of Alloys and Compounds[J],2009,487:109
62 Kawasaki M,Langdon T G.Journal of Materials Science[J],2007,42:1782
63 Sungwon L,Berbon P B,Furukawa M et al.Materials Science and Engineering A[J],1999,272:63
64 Horita Z,Fujinami T,Nemoto M et al.Journal of Materials Processing Technology[J],2001,117:288
65 Málek P,Cieslar M,Islamgaliev R K.Journal of Alloys and Compounds[J],2004,378:237
66 Chen Y J,Chai Y C,Roven H J.Materials Science and Engineering A[J],2012,545:139
67 Berbon P B,Langdon T G,Tsenev N K et al.Metallurgical and Materials Transactions A[J],1998,29A:2237
2 Williams J C,Starke Jr E A.Acta Materialia[J],2003,51:5775
3 Rioja R J,Liu J.Metallurgical and Materials Transactions A[J],2012,43A:3325
4 Rioja R J.Materials Science and Engineering A[J],1998,257:l00
5 Furukawa M,Iwahashi Y,Horita Z et al.Acta Materialia[J],1997,45(11):4751
6 Munoz-Morris M A,Morris D G.Script Materialia[J],2010,63:304
7 Furukawa M,Berbon P B,Horita Z et al.Metallurgical and Metarials Transactions A[J],1998,29A:170
8 Wang Z C,Prangnell P B.Materials Science and Engineering A[J],2002,328:87
9 Markushev M V,Bampton C C,Murashkin M Y et al.Materials Science and Engineering A[J],1997,234-236:927
10 Sabirov I,Murashkin M Y,Valiev R Z.Materials Science and Engineering A[J],2013,560:1
11 Huang X,Kamikawa N,Hansen N.Materials Science and Engineering A[J],2008,483-484:102
12 Langdon T G.Acta Materialia[J],2013,61:7035
13 Jiang J H,Shi J,Yao Y H et al.Journal of Materials Engineering and Performance[J],2015,24(5):2016
14 Alvandi H,Farmanesh K.Procedia Materials Science[J],2015,11:17
15 Liu M P,Hans J R,Liu X T et al.Journal of Materials Science[J],2010,45(17):4659
16 Prangnell P B,Bowen J R,Apps P J.Materials Science and Engineering A[J],2004,375-377:178
17 Valiev R Z,Langdon T G.Progress in Materials Science[J],2006,51:881
18 Kaibyshev R,Shipilova K,Musin F.Materials Science and Engineering A[J],2005,396:341
19 Mazilkin A A,Myshlyaev M M.Journal of Materials Science[J],2006,41:3767
20 Adamczyk-Cieslak B,Mizera J,Kurzyd?owski K J.Materials Science and Engineering A[J],2010,527:4716
21 Munoz-Morris M A,Morris D G.Materials Science and Engineering A[J],2011,528:3445
22 Ma A B,Suzuki K,Nishida Y et al.Acta Materialia[J],2005,53:211
23 Kun X W,Wei W,Du Q B et al.Materials Science and Engineering A[J],2009,525:55
24 Yuan Y C,Ma A B,Gou X F et al.Materials Science and Engineering A[J],2016,677:125
25 Alizadeh R,Mahmudi R,Pereira P H R et al.Materials Science and Engineering A[J],2017,682:577
26 Zhang L Y,Ma A B,Jiang J H et al.Advanced Materials Research[J],2015,1095:942
27 Zhang P,Ma A B,Lu S et al.Materials&Design[J],2011,32:348
28 Kral P,Dvorak J,Blum W et al.Materials Characterization[J],2016,116:84
29 Musin F,Kaibyshev R,Motohashi Y et al.Materials Transactions[J],2002,43:2370
30 Yang Y,Ma F,Hu H B et al.Materials Science and Engineering A[J],2014,606:299
31 Islamgaliev R K,Yunusova N F,Valiev R Z.Scripta Materialia[J],2003,49:467
32 Zhu Z X,Han J,Gao C et al.Materials Science and Engineering A[J],2017,681:65
33 Wongsa-Ngam J,Kawasaki M,Langdon T G.Journal of Material Science[J],2013,48:4653
34 Ovri H,Lilleodden E T.Acta Materialia[J],2015,89:88
35 Truong C T,Kabisch O,Gille W et al.Materials Chemistry and Physics[J],2002,73:268
36 Gault B,Cui X Y,Moody M P et al.Scripta Materialia[J],2012,66:903
37 Yoshimura R,Konno T J,Abe E et al.Acta Materialia[J],2003,51:2891
38 Lavernia E J,Srivatsan T S,Mohamed F A.Journal of Materials Science[J],1990,25:1137
39 Deng Y L,Yang J L,Li S Y et al.Transactions of Nonferrous Metals Society of China[J],2014,24:1653
40 Ott N,Yan Y M,Ramamurthy S et al.Scripta Materialia[J],2016,119:17
41 Noble B,Bray S E.Acta Materialia[J],1998,46:61
42 Decreus B,Deschamps A,Geuser F D et al.Acta Materialia[J],2013,61:2207
43 Murken1 J,H?hner R,Skrotzki B.Materials Science and Engineering A[J],2003,363:159
44 Deschamps A,Sigli C,Mourey T et al.Acta Materialia[J],2012,60:1917
45 Kim J M,Seong K D,Jun J H et al.Journal of Alloys and Compounds[J],2007,434-435:324
46 Gao C,Zhu Z,Han J et al.Materials Science and Engineering A[J],2015,639:489
47 Dorin T,Geuser F D,Lefebvre W et al.Materials Science and Engineering A[J],2014,605:119
48 Deschamps A,Garcia M,Chevy J et al.Acta Materialia[J],2017,122:32
49 Mu?oz-Morris M A,Gutierrez-Urrutia I,Galderon N et al.Materials Science and Engineering A[J],2008,492:268
50 Courtney T H.Mechanical Behavior of Materials[M].Beijing:China Machine Press,2004:181,325
51 Zha M,Li Y J,Mathiesen R H et al.Scripta Materialia[J],2015,105:22
52 Zha M,Li Y J,Mathiesen R H et al.Acta Materialia[J],2015,84:42
53 Han J,Zhu Z X,Li H J et al.Materials Science&Engineering A[J],2016,651:435
54 Cabibbo M.Materials Characterization[J],2012,68:7
55 Lee S W,Horita Z,Hirosawa S et al.Materials Science and Engineering A[J],2012,546:82
56 Deschamps A,Decreus B,Geuser F D et al.Acta Materialia[J],2013,61:4010
57 Liu S M,Wang Z G.Scripta Materialia[J],2003,48:1421
58 Li H P,Ye L Y,Zhang P et al.Transactions of Nonferrous Metals Society of China[J],2014,24:2079
59 Zhang X M,Zheng D W,Ye L Y et al.Journal of Central South University and Technology[J],2010,17:659
60 Hales S J,Mcnelley T R,Munro I G.Scripta Metallurgica[J],1989,23:967
61 Ye L Y,Zhang X M,Zheng D W et al.Journal of Alloys and Compounds[J],2009,487:109
62 Kawasaki M,Langdon T G.Journal of Materials Science[J],2007,42:1782
63 Sungwon L,Berbon P B,Furukawa M et al.Materials Science and Engineering A[J],1999,272:63
64 Horita Z,Fujinami T,Nemoto M et al.Journal of Materials Processing Technology[J],2001,117:288
65 Málek P,Cieslar M,Islamgaliev R K.Journal of Alloys and Compounds[J],2004,378:237
66 Chen Y J,Chai Y C,Roven H J.Materials Science and Engineering A[J],2012,545:139
67 Berbon P B,Langdon T G,Tsenev N K et al.Metallurgical and Materials Transactions A[J],1998,29A:2237