摘要
介绍了某汽车发动机有限公司车间生产废水处理工程的工艺流程、设计参数、调试和运行结果。该工程采用隔油/Fenton氧化/混凝/气浮/水解酸化/生物接触氧化处理工艺,出水水质达到《污水综合排放标准》(GB 8978—1996)的一级标准。工程实践表明:该处理系统具有处理效果稳定、操作简便、运行费用低等特点。
The process flow chart,design parameters,debugging,and operation results of the treatment project of wastewater from the automobile engine shop of a car engine company,Ltd. is introduced. The wastewater has been treated by the treatment process,oil separation-Fenton oxidation-coagulation-floatation-hydrolysis acidificationbiological contact oxidation. In this case,the effluent quality could meet the requirements of the First Class Criterion Specified in the Integrated Wastewater Discharge Standard(GB 8978—1996). The practice indicates that the treatment process is characterized by stable treatment efficacy,simple operation,low operation cost and so on.
引文
[1]杨娟,任源,肖凯军,等.混凝—Fenton氧化—FeO还原预处理高浓度硝基苯生产废水[J].环境工程学报,2012,6(5):1483-1488.
[2]李红亮,韩洪军,姜丹,等.溶气气浮/水解酸化/接触氧化工艺处理亚麻生产废水[J].中国给水排水,2008,24(2):52-54.
[3]李川.水解酸化-活性污泥法处理印染废水研究[J].环境工程学报,2009,3(10):1789-1792.
[4]罗松柏,罗友元,吴玉华.隔油气浮过滤吸附工艺处理机械工业含油废水[J].工业水处理,2009,29(11):88-90.
[5]董婧蒙.传统钙法除磷的机理及改良[D].重庆:重庆大学硕士学位论文,2009.
[6]郦和生,陈新芳,刘伟,等.Fenton试剂处理含油废水的实验研究[J].北京化工大学学报,2007,34(3):238-240.
[7]韩国义,郑俊,王正收,等.隔油/气浮/两段生化法处理炼油厂含油废水[J].中国给水排水,2010,26(2):64-67.
[8]刘丽,罗松柏,谢智华.水解酸化/曝气/气浮/Fenton工艺处理造纸废水[J].中国给水排水,2011,27(10):73-75.