汽车轴承部件异常开裂的电子探针分析
|
摘要
使用电子探针对某汽车轴承部件在成型过程中出现的开裂失效进行了解析,解释了出现失效裂纹的主要原因是部件中间位置出现元素硫的偏析聚集使得中间位置不易形成与其他位置一致的铁素体+珠光体组织,而能够细化晶粒的元素铝的负偏析导致中间位置形成粗大的铁素体组织,另外,粗大的非金属复合夹杂物的存在进一步割裂了基体性能的连续性,恶化了中间位置的综合性能。结果表明,电子探针高灵敏度的特征,能够直观地表征微量元素铝和硫的偏析分布。同时,可借助电子探针背散射检测器高灵敏度的特点,直接进行渗层的观察和评价。
The failure of a certain automobile bearing part during forming process was analyzed by using electron probe micro analyzer. It was explained that the main reasons for the failure crack were that the segregation and accumulation of elemental sulfur in the middle of the component made it difficult to form ferrite+pearlite structure as other positions,while the negative aggregation of elemental aluminum which could refine the grain size led to the formation of coarse ferrite structure in the middle location. In addition, the existence of coarse non-metallic inclusions further split the continuity of matrix properties,deteriorating the comprehensive performance of the intermediate position. The result showed that the segregation distribution of trace elements aluminum and sulphur could be visually characterized by electron probe micro analyzer. Also, the characteristic of high sensitive back scattered electron detector could be used to directly observe and evaluate the surface treatment layer.
The failure of a certain automobile bearing part during forming process was analyzed by using electron probe micro analyzer. It was explained that the main reasons for the failure crack were that the segregation and accumulation of elemental sulfur in the middle of the component made it difficult to form ferrite+pearlite structure as other positions,while the negative aggregation of elemental aluminum which could refine the grain size led to the formation of coarse ferrite structure in the middle location. In addition, the existence of coarse non-metallic inclusions further split the continuity of matrix properties,deteriorating the comprehensive performance of the intermediate position. The result showed that the segregation distribution of trace elements aluminum and sulphur could be visually characterized by electron probe micro analyzer. Also, the characteristic of high sensitive back scattered electron detector could be used to directly observe and evaluate the surface treatment layer.
引文
[1]刘桥方,严枫.我国轴承制造技术的现状及其发展趋势[J].轴承,2005(6):42.
[2]李培培.高端轴承制造关键技术研究[J].军民两用技术与产品,2017(18):107.
[3]杨晓蔚.高端轴承制造的关键技术[J].金属加工:冷加工,2013(16):16.
[4]高阳,陈嗣国.汽车轴承材料及热处理技术浅析[J].金属加工:热加工,2017(19):3.
[5]吕钢,张雷.汽车轴承热处理技术及发展方向[J].金属加工,2010(15):22.
[6]赵同新,吉见聪,加藤治彦,等.电子探针在金属材料分析与研究中的应用[J].理化检验:物理分册,2018,54(7):504.
[7]赵同新.扫描电镜和电子探针对比测试碲在镍合金中的分布[J].物理测试,2018,36(4):21.
[8]赵同新,王震威.表面分析仪器在铅蓄电池测试中的应用[J].物理测试,2017,35(5):36.
[9]崔忠圻,覃耀春.金属学与热处理[M].北京:机械工业出版社,2011.
[2]李培培.高端轴承制造关键技术研究[J].军民两用技术与产品,2017(18):107.
[3]杨晓蔚.高端轴承制造的关键技术[J].金属加工:冷加工,2013(16):16.
[4]高阳,陈嗣国.汽车轴承材料及热处理技术浅析[J].金属加工:热加工,2017(19):3.
[5]吕钢,张雷.汽车轴承热处理技术及发展方向[J].金属加工,2010(15):22.
[6]赵同新,吉见聪,加藤治彦,等.电子探针在金属材料分析与研究中的应用[J].理化检验:物理分册,2018,54(7):504.
[7]赵同新.扫描电镜和电子探针对比测试碲在镍合金中的分布[J].物理测试,2018,36(4):21.
[8]赵同新,王震威.表面分析仪器在铅蓄电池测试中的应用[J].物理测试,2017,35(5):36.
[9]崔忠圻,覃耀春.金属学与热处理[M].北京:机械工业出版社,2011.