周期冷轧辊孔型数控车削加工分析
|
摘要
本文分析了皮尔格(亦称周期)冷轧辊孔型的几何特征,提出了利用数控车削方法加工的方案,从提高精度和效率的角度对加工路径进行了比较选择,对工作曲线进行了优化设计,采用了较为高效的组合拟合曲线方法,取得了良好的使用效果。
The geometric features of Periodic Type cold roll pass was analyzed,and a method for machining of CNC turning was present in this paper. The machining path was selected from improve the accuracy and efficiency,the working curve was optimized design,a more efficient combination fitting curve method is adopted to achieve good effect.
The geometric features of Periodic Type cold roll pass was analyzed,and a method for machining of CNC turning was present in this paper. The machining path was selected from improve the accuracy and efficiency,the working curve was optimized design,a more efficient combination fitting curve method is adopted to achieve good effect.
引文
[1]李耀群.周期式冷轧管机的发展[J].钢管,2002,31(4):1-8.
[2]罗和平,王彪,汲军.加工仿真技术在数控加工中的应用[J].机械制造,2017,55(5):45-51.
[3]藏昭农.重型卧式车床及轧辊车床数控化改造设计[J].机械工程师,2004(1):89-90.
[4]戚翠芬,张景进,欧阳元陟等.C84125普通轧辊车床的数控化改造及在型钢轧辊切削中的数控应用[J].河北冶金,2004(3):52-54.
[5]王正君,温殿英,张立路.机床数控改造中进给系统步进电机的选择[J].机床与液压,2001(3):109-110.
[6]李学辉,藏欣宗.车床数控改造及编程加工技巧[J].钢管,2003,32(5):35-38.
[7]吴正洪,朱建能,卢耀晖等.基于UG NX的数据车削编程及加工[J].机械制造,2013,51(8):54-57.
[2]罗和平,王彪,汲军.加工仿真技术在数控加工中的应用[J].机械制造,2017,55(5):45-51.
[3]藏昭农.重型卧式车床及轧辊车床数控化改造设计[J].机械工程师,2004(1):89-90.
[4]戚翠芬,张景进,欧阳元陟等.C84125普通轧辊车床的数控化改造及在型钢轧辊切削中的数控应用[J].河北冶金,2004(3):52-54.
[5]王正君,温殿英,张立路.机床数控改造中进给系统步进电机的选择[J].机床与液压,2001(3):109-110.
[6]李学辉,藏欣宗.车床数控改造及编程加工技巧[J].钢管,2003,32(5):35-38.
[7]吴正洪,朱建能,卢耀晖等.基于UG NX的数据车削编程及加工[J].机械制造,2013,51(8):54-57.