摘要
该文介绍了跨孔电阻率CT法的原理,并且考虑溶洞填充物与围岩电阻率差异,利用数值模拟建立地电模型,讨论了视电阻率响应、反演成像,结合工程实例进行了综合分析。实例验证了跨孔电阻率CT法用于岩溶探测是有效的,可指导实际工程。
In this paper, the principle of cross-hole resistivity CT method is introduced,and the difference of resistivity between karst cave filler and surrounding rock is considered. A geoelectric model is established by numerical simulation. The apparent resistivity response and inversion imaging are discussed. A comprehensive analysis is made with engineering examples.The examples show that the cross-hole resistivity CT method is effective in karst detection and it can guide the practical engineering.
引文
[1] 张文俊,李术才,苏茂鑫,等.基于井间电阻率成像的城市地铁溶洞探测方法.山东大学学报:工学版,2014(3):75~82
[2] 杜钦.井间2.5D直流电阻率法正演数值模拟:[学位论文].成都:成都理工大学,2016
[3] 李天成.电阻率成像技术的二维三维正反演研究:[学位论文].北京:中国地质大学(北京),2008
[4] 包勋.井间电阻率成像的2D正反演及其应用研究:[学位论文].南昌:东华理工大学,2012
[5] Liu Bin,Liu Zhengyu,Li Shucai,etc.Comprehensive surface geophysical investigation of karst caves ahead of the tunnel face:A case study in the Xiaoheyan section of the water supply project from Songhua River,Jilin,China.Journal of Applied Geophysics,2017,144:37~49