摘要
针对湖北某高氧化率、高结合率和高泥氧化铜矿的浮选难题,通过试验研究,设计开发出适合该矿石的选冶联合工艺流程:首先快速浮选矿石中的硫化铜矿物,然后对浮选尾矿进行加温酸浸,浸出液再采用硫化钠沉淀,最后添加一定量的粗粒硫化铜精矿进行载体浮选,在原矿含铜1.87%的情况下,通过闭路试验获得总铜精矿含铜18.91%,铜回收率79.33%的良好指标。
Aiming at the flotation problems in a copper oxide ore with high oxidation rate,high bonding rate and high mud in Hubei Province,a combined process of beneficiation and metallurgy suitable for the ore was designed and developed through experimental study.Firstly,the copper sulfide minerals in the ore were rapidly selected by flotation,then the flotation tailings were heated and acid leached,with solution precipitated by sodium sulfide,and finally a certain amount of coarse-grained copper sulfide concentrate was added for carrier flotation.Under the condition of 1.87%copper in raw ore,good indexes were obtained by closed circuit test,including 18.91% of copper and 79.33% of copper recovery in total copper concentrate.
引文
[1]周维志,陈志武,张华邦,等.混合黄药浮选铜录山氧化矿石的研究[J].广东有色金属学报,1995(2):114-119.
[2]张世明,叶国华,张爽,等.云南某低品位氧硫混合型铜矿浮选试验研究[J].矿产综合利用,2016(3):40-43.
[3]张乾予,刘豹,印万忠,等.云南水源地区某氧化铜矿石选矿试验[J].金属矿山,2017(4):60-63.
[4]肖军辉,孙红娟,樊珊萍,等.玻利维亚碳酸盐型混合铜矿石选冶联合方法分离铜硫[J].稀有金属,2014,38(2):290-299.
[5]孙大勇,祁忠旭,董宗良,等.承德某难选铜矿250t/d选矿工业试验研究[J].矿业研究与开发,2018,38(9):63-66.
[6]赵华伦,余成,李兵容,等.浸出-沉淀-载体浮选法处理冲江氧化铜试验研究[J].四川地质学报,2012(9):223-226.
[7]罗传胜,雷鸣,徐桂来,等.大冶铜录山低品位氧化铜矿石预处理-磨矿浮选的研究[J].广东有色金属学报,1997(5):11-19.
[8]熊堃,文书明,先永骏.赤铜矿型氧化铜矿浮选试验研究[J].矿冶,2011(3):26-29.
[9]邱丽娜,梁溢强.云南某铜锌矿石工艺矿物学及选铜流程分析[J].现代矿业,2018(2):106-109.
[10]徐建林,史光大,钟庆文,等.从铜氨溶液中萃取分离铜的试验研究[J].矿产综合利用,2008(5):7-9.
[11]方建军,李艺芬,张文彬.高钙镁难选氧化铜矿处理技术的进展[J].矿冶,2008,17(4):55-57.
[12]陈焕麟,王继溢,程达,等.浸出-沉淀-载体浮选法研究[J].有色金属,1981(1):50-53.