轮胎模具硫化过程数值模拟分析

详细信息    查看全文 | 推荐本文 |

英文篇名：Numerical Simulation Analysis of Vulcanization Process of Tire Mold 作者：刘迎 ; 赵永瑞 ; 潘川 英文作者：LIU Ying;ZHAO Yongrui;PAN Chuan;China University of Petroleum;Qingdao Doublestar Tire Co.,Ltd; 关键词：轮胎 ; 模具结构 ; 热分析 ; 热力耦合分析 ; 硫化工艺 英文关键词：tire;;mold structure;;thermal analysis;;coupled thermo-mechanical analysis;;vulcanization process 中文刊名：LTGY 英文刊名：Tire Industry 机构：中国石油大学(华东)机电工程学院;青岛双星轮胎有限公司; 出版日期：2019-03-10 出版单位：轮胎工业 年：2019 期：v.39 语种：中文; 页：LTGY201903023 页数：5 CN：03 ISSN：11-3478/TQ 分类号：49-53

摘要

以12R22. 5轮胎硫化模具为例,采用ANSYS有限元分析软件,对模具在温模过程、开模过程和硫化过程的温度场进行仿真模拟,得到模具在3个过程中的温度分布、模具内取点温度-时间曲线、硫化过程的应力分布和型腔取点位置应力-时间曲线,可为模具结构改进提供参考。
        Taking 12 R22.5 tire mold as an example,the temperature field of the mold was simulated during the mold heating process,mold opening process and curing process by ANSYS finite element analysis software. The temperature distribution of the mold during the three processes,temperature-time curves of specific points in mold cavity,stress distribution during the curing process and stress-time curves of specific points in mold cavity were obtained,which could provide a reference for mold structure modification.

引文

[1]吴畏,伍先安,杨卫民,等.轮胎硫化设备及工艺研究进展[J].橡胶工业,2018,65(6):711-716.
    [2]唐霞.子午线轮胎电磁直压硫化工艺的研究[D].北京:北京化工大学,2016.
    [3]刘斐.导轨式轮胎直压硫化机构研制与性能研究[D].北京:北京化工大学,2015.
    [4]刘迎.轮胎模具结构研究现状及分析[J].模具工业,2017,43(3):8-11.
    [5]刘迎.基于热力非耦合数值模拟的轮胎模具结构优化[J].模具工业,2017,43(5):20-23.
    [6]Zhongke T,Zihao Z,Haiming H.Application Analysis of Radial Tire Mold Assembly Process[J].Advanced Materials and Research,2011,221:566-570.
    [7]Yang Ho Dong,Yoon Hee Sung,Oh Yool Kwon.A Study on Cooling Characteristics of Thermoelectric Cooling System Using Thermoelectric Materials[J].Advanced Materials Research,2011,221:264-265.