摘要
自进式旋转喷头是管道清洗用高压水射流清洗装置的关键执行部件,为了保证自进式旋转喷头在管道清洗过程中能够稳定地自进和旋转,分析了自进式旋转喷头的喷嘴数目、夹角及偏心量对其运动和清洗效果的影响,通过对比旋转式喷头与非旋转式喷头、无偏心喷头的喷嘴布置及清洗效果,得出结论:喷嘴数目、夹角及偏心量是保证喷头自进和旋转的关键,且三者之间相互关联,进而分析了喷嘴布置设计的要点。基于此,提出了一种合理高效旋转喷头的喷嘴布置方式,既能使自进式旋转喷头稳定运动,又能提高高压水清洗的效率。(图5,参21)
Self-propelled rotary sprinkler is the key executive component of the high-pressure water jet cleaning device used in the operation of pipeline cleaning. To ensure that the self-propelled rotary sprinkler can self-propel and rotate stably in the process of pipeline cleaning, the influence of the layout factors(i.e., number of nozzles, included angle and eccentricity) on the movement and cleaning effect of the self-propelled rotary sprinkler was analyzed in this paper. Then, rotary sprinkler,non-rotary sprinkler and eccentricity free sprinkler were compared from the aspects of nozzle layout and cleaning effect. It is concluded that the number of nozzles, the included angle and the eccentricity are the key factors to ensure the self-propelling and rotating of the sprinkler and they are interdependent. Finally, the key design points involved in nozzle layout were put forward. In this way, a reasonable and efficient method for the layout of nozzles in rotary sprinklers is developed, which can ensure the stable movement of the self-propelled rotary sprinkler, and improve the efficiency of high-pressure water cleaning.(5 Figures, 21 References)
引文
[1]庄蕾.高压水射流清洗用喷嘴及喷头[J].清洗世界,2003,19(12):28-31.ZHUANG L.Spray nozzles in high pressure water jet[J].Cleaning World,2003,19(12):28-31.
[2]石熠,陈家庆,孔祥功,等.加油站埋地油罐清洗用旋转喷头的结构设计[J].油气储运,2016,35(9):994-999.SHI Y,CHEN J Q,KONG X G,et al.Structural design of rotary jet head for mechanical cleaning of underground oil storage tanks in service stations[J].Oil&Gas Storage and Transportation,2016,35(9):994-999.
[3]贺乐昌.水力深穿透射孔自进旋转喷头关键参数研究[D].哈尔滨:哈尔滨工业大学,2009:21-23.HE L C.Study on key parameters of self-propelled rotator nozzle for water-jet deep penetrating perforation[D].Harbin:Harbin Institute of Technology,2009:21-23.
[4]杨博凯.煤层自进式旋转钻头的设计与实验研究[D].重庆:重庆大学,2010:20-30.YANG B K.Design and research on self-propelling and rotating drill for coal seam[D].Chongqing:Chongqing University,2010:20-30.
[5]董小龙.连续油管径向旋转喷射钻进的研究[D].长春:长春理工大学,2014:25-39.DONG X L.Study on radial rotary jet drilling of coiled tubing[D].Changchun:Changchun University of Science and Technology,2014:25-39.
[6]宋加会,刘昌林,许胜涛,等.高压水射流清洗技术及其在管道除垢中的应用[J].化工设备与管道,2014,51(5):79-82.SONG J H,LIU C L,XIU S T,et al.Cleaning technique with high pressure water jet and its application in removing scale in piping[J].Process Equipment&Piping,2014,51(5):79-82.
[7]刘玉洲,陆庭侃.管道自进式高压水射流清洗技术的应用[J].煤矿机械,2004(12):101-102.LIU Y Z,LU T K.Application of self-propelled high pressure water jet technology for pipeline cleaning[J].Coal Mine Machinery,2004(12):101-102.
[8]刘庭成,范晓红,刘焱.高压水射流清洗机喷嘴的结构与参数[J].清洗世界,2010,26(9):32-37,41.LIU T C,FAN X H,LIU Y.Structure and parameters of high pressure water-jet cleaner nozzles[J].Cleaning World,2010,26(9):32-37,41.
[9]宁会峰,龚俊,曹文辉.喷头偏心对射流清洗管道影响研究[J].石油矿场机械,2008,37(10):19-22.NING H F,GONG J,CAO W H.Study of nozzle eccentricity in pipeline cleaning with high pressure water jet[J].Oil Field Equipment,2008,37(10):19-22.
[10]TEIMOURIAN H,SHABGARD M R,MOMBER A W.Depainting with high-speed water jets:Paint removal process and substrate surface roughness[J].Progress in Organic Coatings,2010,69(4):455-462.
[11]HAM Y,KWON S,NOH J,et al.Development of road stripe removing equipment using high-pressure water jet[J].Automation in Construction,2006,15(5):578-588.
[12]HABAK M,LEBRUN J L.An experimental study of the effect of high-pressure water jet assisted turning(HPWJAT)on the surface integrity[J].International Journal of Machine Tools and Manufacture,2011,51(9):661-669.
[13]STOXREIER T,MARTIN A,TEZA D,et al.Hard rock cutting with high pressure jets in various ambient pressure regimes[J].International Journal of Rock Mechanics and Mining Sciences,2018,108(8):179-188.
[14]WILSON D I,ATKINSON P,KOHLER H,et al.Cleaning of soft-solid soil layers on vertical and horizontal surfaces by stationary coherent impinging liquid jets[J].Chemical Engineering Science,2014,109(5):183-196.
[15]王丽萍,蔡晓君,窦艳涛,等.高压水射流清洗参数实验研究[J].实验室研究与探索,2017,36(8):48-51.WANG L P,CAI X J,DOU Y T,et al.Experimental research of high pressure water jet cleaning parameters[J].Research and Exploration in Laboratory,2017,36(8):48-51.
[16]韩启龙,马洋.喷嘴结构对高压水射流影响及结构参数优化设计[J].国防科技大学学报,2016,38(3):68-74.HAN Q L,MA Y.Influence of nozzle structure on high pressure water jet and optimization design of nozzle structure parameter[J].Journal of National University of Defense Technology,2016,38(3):68-74.
[17]廖松,邓松圣,李亮,等.用于清洗除锈的淹没空化水射流喷嘴实验研究[J].天然气与石油,2018,36(4):47-53.LIAO S,DENG S S,LI L,et al.Experimental study on submerged cavitation water jet nozzles for rust cleaning[J].Natural Gas and Oil,2018,36(4):47-53.
[18]蔡毅,苏国兵.高压水射流喷嘴设计及有限元分析[J].机械设计与研究,2017,33(6):163-167,171.CAI Y,SU G B.Design and finite element analysis for highpressure water-jet nozzle[J].Machine Design&Research,2017,33(6):163-167,171.
[19]王超,董健,鞠少栋,等.超高压磨料射流喷嘴流场分析及结构优化[J].石油机械,2017,45(6):91-95.WANG C,DONG J,JU S D,et al.Flow field analysis and structure optimization of ultrahigh pressure abrasive water jet nozzle[J].China Petroleum Machinery,2017,45(6):91-95.
[20]邓松圣,廖松,管金发,等.中心体空化喷嘴全尺寸结构优化研究[J].煤矿机械,2017,38(12):98-101.DENG S S,LIAO S,GUAN J F,et al.Study on full-size structure optimization of central-body cavitation nozzle[J].Coal Mine Machinery,2017,38(12):98-101.
[21]张德荣,吴思梦.基于FLUENT的水力喷砂射孔器喷嘴优化设计[J].石油机械,2017,45(12):71-77.ZHANG D R,WU S M.Optimization design of nozzle of hydraulic sand jet perforator based on FLUENT[J].China Petroleum Machinery,2017,45(12):71-77.