摘要
贵州某锰矿储量大、品位低,为使该矿得到合理开发利用,本文通过化学分析、物相分析、扫描电镜、X射线分析和MLA等方法进行了系统的工艺矿物学研究,在此基础上制订出适合该矿的选矿工艺流程,在原矿含Mn9.52%条件下,通过一粗一扫强磁选,可得到锰品位15.56%,回收率85.54%的良好指标,为该矿的高效利用奠定了技术基础。
Aiming at the characteristics for low-grade and rich-reserves in a manganese from Guizhou in order to make a reasonable development and utilization of the mine, the process of mineralogy was studied by chemical analysis, phase analysis, scanning electron microscopy, X-ray analysis and MLA, to develop a suitable for the ore dressing process. Under the conditions of Mn 9.52% in the raw ore, the results were obtained as follows: manganese content in manganese concentrate is 15.56% and recovery is 85.54%, which laid the technical foundation for the efficient use of the mine.
引文
[1]姚敬劬.我国优质富锰矿资源短缺的应对策略[J].中国矿业,2005(5):1-3.
[2]李赋屏,朱国才,田君.从低品位碳酸锰矿石中富集回收锰的绿色化学工艺研究[J].矿产与地质,2005(1):93-96.
[3]袁明亮,邱冠周.锰矿直接制备高纯碳酸锰工艺研究[J].矿产综合利用,2001(6):13-16.
[4]余文刚,毛治超,孙春叶.我国锰矿资源及评价方法综述[J].金属世界,2013(2):22-24.
[5]张去非.国内外锰矿选矿工艺概述[J].中国矿山工程,2004(6):16-18.
[6]汪镜亮.锰矿产资源及其加工和应用[J].矿产保护与利用,1993(3):39-46.
[7]朱昌洛,沈明伟.低品位碳酸锰矿的选矿技术现状及进展[J].矿产综合利用,2010(5):30-33.
[8]黄枢,肖琪.锰矿石脱磷新工艺的研究[J].中国锰业,1993(4):27-31.