大型化装置空气冷却器管箱入口优化

详细信息    查看全文 | 推荐本文 |

	英文篇名：Inlet design optimization for air cooler bundle based on CFD 作者：冯伟 英文作者：Feng Wei;Luoyang Petrochemical Engineering Corporation Ltd/SINOPEC; 关键词：大型化设计 ; 数值模拟 ; 空气冷却器 ; 方案优化 英文关键词：CFD;;air cooler;;inlet;;optimization 中文刊名：SHJS 英文刊名：Petrochemical Industry Technology 机构：中石化洛阳工程有限公司; 出版日期：2018-09-28 出版单位：石化技术 年：2018 期：v.25 语种：中文; 页：SHJS201809004 页数：3 CN：09 ISSN：11-3477/TE 分类号：16-18

摘要

针对国内石油化工装置大型化设计过程中空气冷却器管束内被冷却介质分布不均匀,夏季冷却效果差的实际情况,采用计算流体动力学(CFD)多相流SST模型体系对不同空冷管箱进口方案的介质流动及分布规律进行了多工况数据模拟和优化分析,结果表明,空冷器管箱入口"三管嘴"设计优于"两管嘴"的设计形式。
        Using computational fluid dynamics(CFD) techniques and SST turbulence model,the comparison and optimization of tube camber inlet solutions were carried out,which was considered to improve the performance of air cooler in a large-scale petrochemical unit.For the air cooler,CFD-simulation results shows that three-inlet plan is better than that of two-inlet.

引文

[1]Launder B E,Spalding D B.The Numerical Computation of Turbulent Flows.Computer Methods in Applied Mechanics and Engineering[M].1974.
    [2]Wilcox D C.Reassessment of the Scale-Determining Equation for Advanced Turbulence Models[J].AIAA J,1998,26(11):1299-1310.
    [3]Menter F R,Kuntz M,Langtry R,Ten years of industrial experience with the SST turbulence model In:Hanjalic K,Nagano Y,Tummers M J,Turbulence,Heat and Mass Transfer 4 Begell House Inc[C],2003:625-632.