摘要
目前第一类污染物只有车间排放浓度标准,没有总排口排放浓度标准,给第一类污染物的日常排放监督管理带来了较大难度。对目前总排口第一类污染物排放浓度评价做法进行了探讨,并对第一类污染物总排口标准如何制定提出了建议。
There is only emission standards of the first kinds of pollutants in workshop outfall at present,but no emission standards in total outfall. Therefore it is difficult to supervise and manage it every day. The current assessment method about the Emission Standards of the first kinds of pollutants in total outfall were discussed,and suggestions on how to set the emission standards were put forward.
引文
[1]虎华.对废水中一类污染物的采样点位和采样频次的探讨[J].江苏环境科技,2001,14(4):46.
[2]陈宏观,张存军.关于废水中一类污染物的采样点位[J].中国环境监测,1999,15(5):13-14.
[3]吴浩汀.制革工业废水处理技术及工程实例[M].北京:化学工业出版社环境科学与工程出版中心,2002:5-6.
[4]郁晶,凌虹,陈婷,等.江苏省化学工业主要水污染物排放地方标准研究[J].江苏环境科技,2008,22(2):47-49.