摘要
对3D打印5CrMnMo热锻模与传统方法制造5CrMnMo热锻模分别进行了磨损试验和热疲劳试验,并对比分析了两者的耐磨损性能和热疲劳性能。结果表明:3D打印5CrMnMo热锻模与传统方法制造5CrMnMo热锻模的磨损量分别为3.9 g和3.8 g,热疲劳裂纹级别分别为5级和4级。3D打印5CrMnMo热锻模与传统方法制造5CrMnMo热锻模的磨损性能相当,热疲劳性能差异较小。3D打印5CrMnMo热锻模具有较好的工程应用价值。
The wear test and thermal fatigue test of 3 D printed 5 CrMnMo hot forging die steel and traditional manufacturing 5 CrMnMo hot forging die steel were carried out in this paper and the wear resistance and thermal fatigue properties were compared and analyzed.The results shows that wear loss of 3 D 5 CrMnMo hot forging die steel and traditional manufacturing 5 CrMnMo hot forging die steel are 3.9 g and 3.8 g respectively,and the grade of thermal fatigue crack are level 5 and 4,respectively.The wear performance of 3 D 5 CrMnMo hot forging die steel and traditional manufacturing 5 CrMnMo hot forging die steel are equal,and the difference in thermal fatigue properties between this two kinds of steels is small.3 D printing 5 CrMnMo hot forging die steel has good engineering application value.
引文
[1] Zeng Xin.The Preparation and properties study of new type hot-work die steel used for aluminum alloy casting[J].Foundry,2017,66(3):234-237.(曾欣.铝合金压铸用新型热作模具钢的制备及性能研究[J].铸造,2017,66(3):234-237.)
[2] Wu Xiaochun,Zuo Pengpeng.Development status and trend of hot working die steels at home and abroad[J].Die & Mould Industry,2013(10):1-9.(吴晓春,左鹏鹏.国内外热作模具钢发展现状与趋势[J].模具工业,2013(10):1-9.)
[3] Wang Jianfei,Chen Changjun,Wang Xiaonan,et al.Microstructure and compressive property of porous stainless steel fabricated by laser 3D printing[J].Journal of Mechanical Engineering,2016(21):206-212.(王健飞,陈长军,王晓南,等.激光3D打印制备多孔结构不锈钢的组织及压缩性能研究[J].机械工程学报,2016(21):206-212.)
[4] Wu Shuai,Fu Hangtao,Lian Yong,et al.Investigation on high temperature wear behavior of a newly developed hot-work tool steel[J].Tribology,2016,36(1):104-109.(吴帅,付航涛,连勇,等.一种新型热作模具钢的高温磨损性能研究[J].摩擦学学报,2016,36(1):104-109.)
[5] Ren Jinqiao.The development of CT365 steel used for hot forging die[J].Special Steel Technology,2016,22(4):20-22,66.(任金桥.热锻模用钢CT365的研制[J].特钢技术,2016,22(4):20-22,66.)
[6] Niu Shiyue,Wang Jinghua.Cracking analysis of large hot working die steel 5CrNiMo [J].Metal Working,2013(15):24-25.(牛十月,王敬华.大型热作模具钢5CrNiMo开裂分析[J].金属加工(热加工),2013(15):24-25.)
[7] Kuang Jianxin,Wang Xinheng,Liu Anmin,et al.Study on compound strengthening process for large hot forging die of 5CrNiMo steel[J].Hot Working Technology,2011,40(6):187-189.(匡建新,汪新衡,刘安民等.5CrNiMo钢大型热锻模复合强化工艺研究[J].热加工工艺,2011,40(6):187-189.)
[8] Zhang Yuanyuan,Li Jun,Shi Kai.Property and finite element analysis of 3D printing flexible material[J].Mechanical & Electrical Engineering Magazine,2018(2):138-142.(张媛媛,李军,石凯.3D打印柔性材料特性及有限元分析方法研究[J].机电工程,2018(2):138-142.)
[9] Wang Mei,Wang Lianghui,Liu Zhongxiao,et al.Research on characteristic course based on 3D printing technology—taking “3D print creative studio” as an Example[J].Modern Educational Technology,2015,25(8):120-126.(王美,王良辉,刘中晓,等.基于3D打印技术的特色课程研究——以“3D打印创意工作室”课程为例[J].现代教育技术,2015,25(8):120-126.)
[10] Wang Yanqing,Shen Jingxing,Wu Haiquan,et al.Application and research status of alternative materials for 3D-printing technology[J].Journal of Aeronautical Materials,2016,36(4):89-98.(王延庆,沈竞兴,吴海全,等.3D打印材料应用和研究现状[J].航空材料学报,2016,36(4):89-98.)
[11] Li Xiaoli,Ma Jianxiong,Li Ping,et al.3D printing technology and its application trend[J].Process Automation Instrumentation,2014,35(1):1-5.(李小丽,马剑雄,李萍,等.3D打印技术及应用趋势[J].自动化仪表,2014,35(1):1-5.)