烟花圆盘造粒机的设计与造粒工艺研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Design of Fireworks Disc Pelletizer and Study on Process Parameters of Granulation 作者：刘晓雯 英文作者：LIU Xiaowen;Department of Electromechanical Engineering,Tangshan College; 关键词：烟花圆盘造粒机 ; 粉体成粒 ; 单因素 ; 正交实验 ; 工艺参数 英文关键词：Fireworks disc pelletizer;;Powder into tablets;;Single factor;;Orthogonal experiment;;Process parameters 中文刊名：JCYY 英文刊名：Machine Tool & Hydraulics 机构：唐山学院机电工程系; 出版日期：2016-05-28 出版单位：机床与液压 年：2016 期：v.44;No.412 语种：中文; 页：JCYY201610018 页数：3 CN：10 ISSN：44-1259/TH 分类号：55-57

摘要

研发一种烟花圆盘造粒机,基于粉体成粒理论,通过单因素实验分析黏合剂的雾化压力及流量、供粉速率、料斗喷嘴与出料口距离和抛光时间4个单因素对微丸质量的影响,确定了工艺参数。然后进行了正交实验,在对实验所得造粒样品进行粒度分级的基础上,最终确定了造粒的最佳工艺参数。
        A fireworks disc pelletizer was developed. Based on the theory of powder into tablets,the influence of the four factors including atomization pressure and flow of the adhesive,rate of powder supply,distance between hopper nozzle and discharge opening,polishing time to the quality of micro pill was gotten by single factor experiments,thus process parameters were determined. Then orthogonal experiment was carried out. The best process parameters was finally gotten based on the particle size classification on granulation samples gotten by orthogonal experiment.

引文

[1]李建平,李承政,王天勇,等.我国粉体造粒技术的现状与展望[J].化工机械,2001(5):295-298.
    [2]伍长春,廖晓兰,王跃龙,等.流化床喷雾造粒的研究进展[J].应用化工,2005,34(6):332-337.
    [3]劳允亮.起爆药化学与工艺学[M].2版.北京:北京理工大学出版社,2004:338-483.
    [4]刘体峰,宋志军.流化床喷雾造粒颗粒强度的影响因素研究[J].中国粉体技术,2006(5):35-37.
    [5]傅宪辉,沈志刚.喷雾造粒中形成的各种颗粒形貌和结构[J].中国粉体技术,2005(2):44-49.