红外遥控功能在车载空调控制器中的应用
|
摘要
随着社会的不断进步,人们对车载空气调节装置使用的控制器在操作的便利性、人性化方面的要求在不断提高。为满足人们对于车载空调控制器的需求,本文研究了红外遥控功能在车载空调控制器实现方法,其具体内容包括以下几个方面:①采用ATMEGA32A-AU单片机中的输入捕捉功能来实现对于红外输入信号的分析、采集,以及软件设计;②红外输入芯片硬件电路设计。
With continuous advancement of society, the requirements for convenience and humanization of the controllers used in vehicle air conditioning devices are constantly increasing. In order to meet people's demand for vehicle air conditioner controller, this paper studies the implementation method of infrared remote control function in vehicle air conditioner controller, and its specific contents including the following aspects: ① The input capture function in the ATMEGA32 A-AU microcontroller is used to analyze, acquire, and design the infrared input signal; ② Infrared input chip hardware circuit design.
With continuous advancement of society, the requirements for convenience and humanization of the controllers used in vehicle air conditioning devices are constantly increasing. In order to meet people's demand for vehicle air conditioner controller, this paper studies the implementation method of infrared remote control function in vehicle air conditioner controller, and its specific contents including the following aspects: ① The input capture function in the ATMEGA32 A-AU microcontroller is used to analyze, acquire, and design the infrared input signal; ② Infrared input chip hardware circuit design.
引文
[1]ATMEL.8-bit Microcontroller datasheet[Z].2008:1-5.
[2]胡绩强,刘莹.温控空调开关的红外遥控系统设计[J].南昌大学学报(工科版),2012(34):83-86.
[3]李泽光.基于单片机的红外遥控器解码器的设计[J].现代电子技术,2007,30(9):33-37.
[4]马潮.AVR单片机嵌入式系统原理与应用实践(第2版)[M].北京:北京航空航天大学出版社,2011.
[5]方宏,陈星耀.红外遥控器信号的接收与发送[J].单片机与嵌入式系统的应用,2001(1):70-71.
[6]杨恢先,王子涵,杨穗,等.一种基于单片机的红外遥控软件解码方法[J].自动化与仪器仪表,2004(2):16-18.
[2]胡绩强,刘莹.温控空调开关的红外遥控系统设计[J].南昌大学学报(工科版),2012(34):83-86.
[3]李泽光.基于单片机的红外遥控器解码器的设计[J].现代电子技术,2007,30(9):33-37.
[4]马潮.AVR单片机嵌入式系统原理与应用实践(第2版)[M].北京:北京航空航天大学出版社,2011.
[5]方宏,陈星耀.红外遥控器信号的接收与发送[J].单片机与嵌入式系统的应用,2001(1):70-71.
[6]杨恢先,王子涵,杨穗,等.一种基于单片机的红外遥控软件解码方法[J].自动化与仪器仪表,2004(2):16-18.