火焰原子吸收法在测定高品位、高氧化率铜矿石物相分析中准确度的探讨
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Discussion on the accuracy of flame atomic absorption spectrometry in phase analysis of copper ores with high grade and oxidation rate
  • 作者:彭乾海
  • 英文作者:PENG Qian-hai;Yunnan Chuxiong Mine and Metallurgy Dayao Guihua Copper Concentration and Metallurgy Co., Ltd.;
  • 关键词:铜物相 ; 分光光度法 ; 火焰原子吸收法
  • 英文关键词:copper phase;;Spectrophotometry;;Flame atomic absorption method
  • 中文刊名:COLO
  • 英文刊名:World Nonferrous Metals
  • 机构:云南楚雄矿冶大姚桂花铜选冶有限公司;
  • 出版日期:2019-06-20 11:14
  • 出版单位:世界有色金属
  • 年:2019
  • 期:No.523
  • 语种:中文;
  • 页:COLO201907081
  • 页数:2
  • CN:07
  • ISSN:11-2472/TF
  • 分类号:148-149
摘要
在铜矿石物相分析中,简易铜物相分析法、分光光度法、火焰原子吸收法都能对铜矿石中的游离氧化铜、结合氧化铜、硫化铜进行准确的测定,两种方法在上机测量时因测定原理的不同,其分析结果特别是在测定高品位全铜、高氧化率铜时,原子吸收法往往其测定结果偏低,本文重点就分析探讨原子吸收法测定铜物相时存在的测定结果偏低的影响因素,并就出现的这种问题提出切实可行的解决方法。
        In the copper ore phase analysis, simple copper phase analysis, spectrophotometry and flame atomic absorption method can free copper oxide of copper ore, copper oxide, copper sulfide in accurate measurement, two methods due to the difference of the measurement in computer measurement, the analysis result, especially in the determination of high grade copper, high oxidation rate of copper, atomic absorption method often its determination result is low, this paper will analyze the atomic absorption method for the determination of copper content phase of the influence factors of the determination results is low, and the problems in the practical and feasible solutions are put forward.
引文
[1]梁红《工业分析》北京:中国环境科学出版社,2006.2.
    [2]黄一石吴朝华杨小林《仪器分析》北京:化学工业出版社,2008.3.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700