基于AdvantEdge的不锈钢攻丝过程切削参数优化

详细信息    查看全文 | 推荐本文 |

英文篇名：Optimization of Cutting Parameters in Tapping Process of Stainless Steel Based on Advant Edge 作者：李小明 ; 罗晓渭 ; 李佳乐 ; 陈峙 ; 闫献国 ; 李龙 英文作者：LI Xiaoming;LUO Xiaowei;LI Jiale;CHEN Shi;YAN Xianguo;LI Long;Institute of Environmental Engineering and Technology,China Academy of Radiation Protection;College of Mechanical Engineering, Taiyuan University of Science and Technology; 关键词：不锈钢攻丝 ; 切削参数 ; AdvantEdge 英文关键词：stainless steel tapping;;cutting parameter;;AdvantEdge 中文刊名：SDJI 英文刊名：Modern Manufacturing Technology and Equipment 机构：中国辐射防护研究院环境工程与技术研究所;太原科技大学机械工程学院; 出版日期：2018-12-15 出版单位：现代制造技术与装备 年：2018 期：No.265 语种：中文; 页：SDJI201812043 页数：2 CN：12 ISSN：37-1442/TH 分类号：92-93

摘要

基于AdvantEdge仿真软件,对攻丝过程进行模拟计算分析,获取不同切削参数下三类丝锥攻制316L奥氏体不锈钢时的最大扭矩值、最大轴向力及最高刀尖温度,并通过316L不锈钢攻丝扭矩试验,验证数值模拟过程中切削模型的可靠性,对试验结果进行对比分析,得出316L奥氏体不锈钢螺纹孔加工时的最优切削参数,并分析不同结构丝锥加工特性,为切削参数优化选择提供参考依据。
        Based on the AdvantEdge simulation software, the simulation calculation and analysis of the tapping process were carried out to obtain the maximum torque value, the maximum axial force and the highest tool tip temperature of the three types of taps under different cutting parameters, and the maximum tooling temperature was 316L stainless steel. The wire torque test verifies the reliability of the cutting model during the numerical simulation. The experimental results are compared and analyzed. The optimal cutting parameters of 316L austenitic stainless steel threaded hole are obtained, and the processing characteristics of different structure taps are analyzed. Optimized choices provide a reference.

引文

[1]车昌盛.高铬镍不锈钢焊条性能及结晶模式研究[D].南京:南京理工大学,2013.
    [2]张慧萍,刘壬航,李珍灿,等.300M超高强度钢高速切削过程仿真研究[J].机械科学与技术,2017,(10):1550-1555.
    [3]郑文虎.刀具材料和刀具的选用[M].北京:国防工业出版社.2012.