自动生成型材手工切割图程序开发
|
摘要
型材套料软件开发的目的是能够快速准确地计算出一个分段内所有型材的最优套料结果,根据套料结果自动生成现场施工可使用的套料图。程序使用C#作为开发工具,采用动态规划算法实现型材按给定的套料方案进行套料,最终生成手工切割图和余料表,通过余料表对型材余料进行有效的管理,通过实际工程应用,验证了使用型材套料软件能够有效缩短设计时间,提高型材利用率。
The purpose of the profile nest is to be able to quickly and accurately calculate the best nest results for all profiles in a block. According to nest results, the automatically generated local construction can be used nest drawing. The program uses C# as a development tool and adopts a dynamic programming algorithm to realize the nest of the profiles according to the given nesting materials. Finally, manual cutting charts and residual material tables are generated, and the profile surplus materials are effectively managed. Through practical application, it has been verified that the application of profile nesting software can effectively shorten the design time and improve the profile utilization.
The purpose of the profile nest is to be able to quickly and accurately calculate the best nest results for all profiles in a block. According to nest results, the automatically generated local construction can be used nest drawing. The program uses C# as a development tool and adopts a dynamic programming algorithm to realize the nest of the profiles according to the given nesting materials. Finally, manual cutting charts and residual material tables are generated, and the profile surplus materials are effectively managed. Through practical application, it has been verified that the application of profile nesting software can effectively shorten the design time and improve the profile utilization.
引文
[1]刘杰.基于OLE技术的造船厂信息一体化研究[J].船海工程,2007,36(2):84-86.
[2]郭朝义,张驰,刘杰.船舶型材自动套料软件开发[J].船海工程,2015(2):15-18.
[3]胡怀建,林伟,钟克焱,等.浅谈型材二次开发自动套料研究和应用[J].船舶标准化工程师,2016,49(6):22-24.
[4]成宇韬,明星.型材一维套料软件开发与应用[C]//cad/cam学术交流会议,2015.
[5]姚竞争.TRIBON模型的数据抽取及二次开发[D].哈尔滨:哈尔滨工程大学,2006.
[6]肖贵英.TRIBON与CATIA船体模型交互技术研究[D].哈尔滨:哈尔滨工程大学,2009.
[7]李慧蕾.TRIBON模型的数据提取方法及舰船规范测试应用研究[D].江苏镇江:江苏科技大学,2012.
[8]朱胤逵.基于TRIBON多平台数据交换技术研究[D].辽宁大连:大连理工大学,2015.
[9]徐辉.TRIBON与CATIA船体数据交换研究[D].辽宁大连:哈尔滨工程大学,2008.
[10]AVEVA.AVEVA Marine Concepts User Guide[Z].2008.
[11]韩韡.TRIBON与CATIA间船体模型数据交换技术研究[D].上海:上海交通大学,2013.
[12]胡可一.数字化技术在造船业中的应用[J].上海造船,2011,1:31-36.
[2]郭朝义,张驰,刘杰.船舶型材自动套料软件开发[J].船海工程,2015(2):15-18.
[3]胡怀建,林伟,钟克焱,等.浅谈型材二次开发自动套料研究和应用[J].船舶标准化工程师,2016,49(6):22-24.
[4]成宇韬,明星.型材一维套料软件开发与应用[C]//cad/cam学术交流会议,2015.
[5]姚竞争.TRIBON模型的数据抽取及二次开发[D].哈尔滨:哈尔滨工程大学,2006.
[6]肖贵英.TRIBON与CATIA船体模型交互技术研究[D].哈尔滨:哈尔滨工程大学,2009.
[7]李慧蕾.TRIBON模型的数据提取方法及舰船规范测试应用研究[D].江苏镇江:江苏科技大学,2012.
[8]朱胤逵.基于TRIBON多平台数据交换技术研究[D].辽宁大连:大连理工大学,2015.
[9]徐辉.TRIBON与CATIA船体数据交换研究[D].辽宁大连:哈尔滨工程大学,2008.
[10]AVEVA.AVEVA Marine Concepts User Guide[Z].2008.
[11]韩韡.TRIBON与CATIA间船体模型数据交换技术研究[D].上海:上海交通大学,2013.
[12]胡可一.数字化技术在造船业中的应用[J].上海造船,2011,1:31-36.