3D打印技术在口腔种植领域的应用效果观察
|
摘要
目的探讨3D打印技术在口腔种植领域的应用效果。方法选取2017年5月至2018年5月本院接受口腔种植的患者106例为研究对象,随机将其等分为研究组和对照组,对照组应用传统的种植方法进行治疗,研究组应用3D打印技术进行治疗,比较两组患者的治疗效果、手术费用手术用时及实施口腔种植后患者的疼痛情况。结果研究组患者的治疗效果显著高于对照组(P <0. 05);研究组患者的手术费用、手术用时等明显高于对照组(P <0. 05);在实施口腔种植后,研究组患者的疼痛评分显著低于对照组(P <0. 05)。结论在口腔种植领域,使用3D打印技术能够使患者的种植体与植入位点更加契合,减轻患者的痛苦,值得在临床上进一步推广应用。但3D打印技术同时面临许多瓶颈以及临床费用较高的问题,需要进一步改革。
Objective To explore the application effect of 3 D printing technology in oral implants. Methods To select 106 cases of patients who received oral implants in our hospital from May 2017 to May 2018 as the study subjects. They were divided into study group and control group with the same number of patients randomly. The control group was treated with traditional planting methods. The study group was applied with 3 D printing technology for treatment and nursing. The basic indicators such as the treatment effect and clinical cost of the two groups of patients and the pain of the patients after oral implants were compared. Results The efficacy in the study group was obviously better than that in the control group( P < 0. 05). The treatment cost and time of the study group were significantly more than those of the control group( P < 0. 05). After the oral implant,the pain score of the study group was significantly lower than that of the control group( P < 0. 05). Conclusion In the field of oral implants,the use of 3 D printing technology can make the implants of the patients more compatible with the implantation site and alleviate the suffering of the patients. As a result,it is worth further clinical application. However,3 D printing technology faces many bottlenecks and its clinical costs is high. Therefore,it need further reform.
Objective To explore the application effect of 3 D printing technology in oral implants. Methods To select 106 cases of patients who received oral implants in our hospital from May 2017 to May 2018 as the study subjects. They were divided into study group and control group with the same number of patients randomly. The control group was treated with traditional planting methods. The study group was applied with 3 D printing technology for treatment and nursing. The basic indicators such as the treatment effect and clinical cost of the two groups of patients and the pain of the patients after oral implants were compared. Results The efficacy in the study group was obviously better than that in the control group( P < 0. 05). The treatment cost and time of the study group were significantly more than those of the control group( P < 0. 05). After the oral implant,the pain score of the study group was significantly lower than that of the control group( P < 0. 05). Conclusion In the field of oral implants,the use of 3 D printing technology can make the implants of the patients more compatible with the implantation site and alleviate the suffering of the patients. As a result,it is worth further clinical application. However,3 D printing technology faces many bottlenecks and its clinical costs is high. Therefore,it need further reform.
引文
[1]戴振宁,张宇,黄文华. 3D打印技术在口腔种植领域的应用进展[J].中国医学物理学杂志,2016,33(9):952-954.
[2]王健,王书晗,冯晓明,等. 3D打印在口腔医疗器械领域的应用[J].中国医疗器械信息,2017,23(3):11-15.
[3]田冶,曾庆慧,胡相华,等.可用于3D打印口腔个性化修复体的生物医用材料的研究进展[J].中国医疗器械信息,2016,22(23):14-18.
[4]骆伟燕,洪煜锐,张志娟,等.二氧化锆3D打印技术在牙体围修复期中的应用[J].护理实践与研究,2016,13(3):83-85.
[5]李小玲,易银芝. 3D打印技术在骨科术前护理的应用现状[J].护理实践与研究,2018,15(12):33-35.
[6]胡洪成,卢松鹤. 3D打印技术在口腔医学应用的国内外现状和趋势[J].中国医疗器械信息,2017,23(3):6-10.
[7]肖海清,蔡立宏,徐红,等. 3D打印光敏树脂定制氧化锆套环导板在口腔种植中的应用[J].健康之路,2016,23(12):3-4.
[8]周勇,陈婉璐,黄文秀,等.基于3D打印技术的种植手机引导导板的临床应用[J].口腔医学研究,2017,33(7):766-769.
[9]朱丽莎,陈宇明,李鹤飞,等. 3D打印用光敏树脂材料及其在口腔医学领域的应用[J].中国组织工程研究,2018,22(6):979-984.
[10]赵雪竹,唐志辉,许卫华,等.仿真颌骨模型结合牙种植手术导板在口腔种植教学中的应用[J].中国医学教育技术,2016,30(3):313-316.
[11]赵晓军,王会超,许云海,等. 3D打印种植导板在后牙即刻种植中的临床应用研究[J].河北医科大学学报,2017,38(6):691-694.
[12]汪烈,陈智渊,刘融,等.个体化3D打印种植导板在多牙种植中的临床应用[J].上海口腔医学,2017,26(4):453-457.
[13]张永弟,张子昂,杨光,等.口腔种植导板的数字化设计与3D打印[J].河北工业科技,2018,35(4):283-287.
[14]邹耿森,樊牮,许志强,等.冷热循环对粘接剂与种植固定桥粘接力的影响[J].口腔医学研究,2016,32(4):338-342.
[2]王健,王书晗,冯晓明,等. 3D打印在口腔医疗器械领域的应用[J].中国医疗器械信息,2017,23(3):11-15.
[3]田冶,曾庆慧,胡相华,等.可用于3D打印口腔个性化修复体的生物医用材料的研究进展[J].中国医疗器械信息,2016,22(23):14-18.
[4]骆伟燕,洪煜锐,张志娟,等.二氧化锆3D打印技术在牙体围修复期中的应用[J].护理实践与研究,2016,13(3):83-85.
[5]李小玲,易银芝. 3D打印技术在骨科术前护理的应用现状[J].护理实践与研究,2018,15(12):33-35.
[6]胡洪成,卢松鹤. 3D打印技术在口腔医学应用的国内外现状和趋势[J].中国医疗器械信息,2017,23(3):6-10.
[7]肖海清,蔡立宏,徐红,等. 3D打印光敏树脂定制氧化锆套环导板在口腔种植中的应用[J].健康之路,2016,23(12):3-4.
[8]周勇,陈婉璐,黄文秀,等.基于3D打印技术的种植手机引导导板的临床应用[J].口腔医学研究,2017,33(7):766-769.
[9]朱丽莎,陈宇明,李鹤飞,等. 3D打印用光敏树脂材料及其在口腔医学领域的应用[J].中国组织工程研究,2018,22(6):979-984.
[10]赵雪竹,唐志辉,许卫华,等.仿真颌骨模型结合牙种植手术导板在口腔种植教学中的应用[J].中国医学教育技术,2016,30(3):313-316.
[11]赵晓军,王会超,许云海,等. 3D打印种植导板在后牙即刻种植中的临床应用研究[J].河北医科大学学报,2017,38(6):691-694.
[12]汪烈,陈智渊,刘融,等.个体化3D打印种植导板在多牙种植中的临床应用[J].上海口腔医学,2017,26(4):453-457.
[13]张永弟,张子昂,杨光,等.口腔种植导板的数字化设计与3D打印[J].河北工业科技,2018,35(4):283-287.
[14]邹耿森,樊牮,许志强,等.冷热循环对粘接剂与种植固定桥粘接力的影响[J].口腔医学研究,2016,32(4):338-342.