助剂对滚塑专用茂金属聚乙烯树脂MPE6性能的影响

详细信息    查看全文 | 推荐本文 |

英文篇名：Effects of additives on properties of special metallocene polyethylene resin MPE6 for rotational molding 作者：裴小静 ; 张超 ; 刘少成 ; 徐素兰 ; 张广明 英文作者：Pei Xiaojing;Zhang Chao;Liu Shaocheng;Xu Sulan;Zhang Guangming;Research Institute of Qilu Branch Co.,SINOPEC; 关键词：茂金属聚乙烯 ; 滚塑 ; 抗氧剂 ; 紫外光吸收剂 ; 制品 英文关键词：metallocene polyethylene;;rotational molding;;antioxidant;;ultraviolet absorbent;;article 中文刊名：HCSZ 英文刊名：China Synthetic Resin and Plastics 机构：中国石油化工股份有限公司齐鲁分公司研究院; 出版日期：2014-11-25 出版单位：合成树脂及塑料 年：2014 期：v.31 语种：中文; 页：HCSZ201406006 页数：4 CN：06 ISSN：11-2769/TQ 分类号：17-20

摘要

研究了抗氧剂和紫外光吸收剂用量对滚塑专用茂金属聚乙烯(PE)树脂MPE6老化性能的影响;探讨了MPE6的滚塑加工性能,并与进口滚塑专用茂金属PE树脂PE1及用Ziegler-Natta催化剂生产的进口滚塑专用PE树脂PE2进行了对比。结果表明:MPE6的加工流动性和滚塑设备适应性好,且其滚塑制品的基本性能与用PE1生产的制品相当,常温简支梁缺口冲击强度和高处跌落性能优于用PE2生产的制品。
        Effects of dosages of the antioxidants and the ultraviolet absorbent on aging of special metallocene polyethylene(PE) resin MPE6 for rotational molding were studied. Rotational molding properties of MPE6 were explored and compared with those of imported special PE resins for rotational molding including metallocene resin PE1 and PE2 produced with Ziegler-Natta catalyst. The results indicate that MPE6 has good processing fluidity and rotational molding equipment adaptability. Basic properties of the rotational molding article made of MPE6 match those of the article made of PE1. The Charpy notched impact strength at room temperature and drop performance from height of the article made of MPE6 is superior to those of the article made of PE2.

引文

[1]Mahanwar P A,Sharma Tarunesh.Rotational molding[J].Popular Plastics&Packaging,2008,53(8):27-32.
    [2]Hanna P R,Kearns M P.Study into the densification behaviour of polyethylenes for rotational moulding[C]//Society of Plastics Engineers.67th Annual Technical Conference.Chicago:[s.n.].2009:1387-1390.