基于参数化设计的轮胎自动化建模研究
|
摘要
研究基于参数化设计的轮胎自动化建模。通过数据管理、数据重用、知识融合理论对轮胎特征进行标准化分类,再通过树状数据结构同步各子部件数据,将轮胎各子部件三维建模方法通过产品知识规则的形式融入三维软件的二次开发过程,实现轮胎子部件的自动化建模,从而同步到轮胎总装配部件,实现轮胎自动化建模。
Tire automatic modeling based on parametric design was researched. Through data management,data reuse,knowledge fusion theory,the tire characteristics were classified into standardized categories,and then the sub-component data was synchronized by tree data structure. The three-dimensional modeling method of the tire sub-components was integrated into the three-dimensional software through product knowledge rules,the automatic modeling of tire sub-components was obtained and synchronized to the tire assembly components,and the automatic modeling of tire products was achieved.
Tire automatic modeling based on parametric design was researched. Through data management,data reuse,knowledge fusion theory,the tire characteristics were classified into standardized categories,and then the sub-component data was synchronized by tree data structure. The three-dimensional modeling method of the tire sub-components was integrated into the three-dimensional software through product knowledge rules,the automatic modeling of tire sub-components was obtained and synchronized to the tire assembly components,and the automatic modeling of tire products was achieved.
引文
[1]李庆,杨晓翔.炭黑填充橡胶复合材料的宏观力学行为研究[J].机械工程学报,2013(18):132-139.
[2]陈海荣,王国林.带复杂花纹的子午线轮胎有限元建模方法[J].橡胶工业,2012,59(5):296-299.
[3]王泽鹏,高峰,薛风先.斜交轮胎三维有限元建模及应力分析[J].农业机械学报,2007,38(5):43-46.
[4]哈斯巴根,朱凌,石琴,等.轮胎有限元建模过程优化及刚度特性仿真研究[J].合肥工业大学学报(自然科学版),2015(7):944-948.
[5]臧孟炎,许玉文,周涛.三维非线性轮胎的五刚特性仿真[J].华南理工大学学报(自然科学版),2011(1):129-133.
[6]燕山,王伟.复杂胎面花纹轮胎有限元分析及试验研究[J].橡胶工业,2016,63(2):102-106.
[7]田敬华,刘波,辛振祥,等.轮胎纵向花纹三维数学模型的建立及应用[J].橡胶工业,2004,51(3):165-167.
[2]陈海荣,王国林.带复杂花纹的子午线轮胎有限元建模方法[J].橡胶工业,2012,59(5):296-299.
[3]王泽鹏,高峰,薛风先.斜交轮胎三维有限元建模及应力分析[J].农业机械学报,2007,38(5):43-46.
[4]哈斯巴根,朱凌,石琴,等.轮胎有限元建模过程优化及刚度特性仿真研究[J].合肥工业大学学报(自然科学版),2015(7):944-948.
[5]臧孟炎,许玉文,周涛.三维非线性轮胎的五刚特性仿真[J].华南理工大学学报(自然科学版),2011(1):129-133.
[6]燕山,王伟.复杂胎面花纹轮胎有限元分析及试验研究[J].橡胶工业,2016,63(2):102-106.
[7]田敬华,刘波,辛振祥,等.轮胎纵向花纹三维数学模型的建立及应用[J].橡胶工业,2004,51(3):165-167.