大型试验设备全寿命计量性设计
|
摘要
从大型试验活动中试验设备的特点入手,本文分析了试验设备性能量值的溯源状况,分析了针对试验设备开展计量性设计研究的必要性并提出了开展计量性设计的基本方法,这有助于装备大型试验设备相关的管理者、设计者、试验者、使用者和维修者将计量性理念融入到自身工作当中,实现用计量的手段将大型试验设备参量,尤其是系统级的输出参量全部溯源到被批准的国家计量标准上,最终实现对试验系统技术状态的有效掌控。
Starting from the characteristics of test equipment in large-scale test activities,this paper analyzes the metrological traceability of the experimental equipment,analyzes the necessity of conducting quantitative design research on test equipment and proposes the basic method of carrying out quantitative design,which helps the managers,designers,testers,users and maintainers involved in the large-scale test equipment integrate the metrological concept into their own work,and realize the measurement of large-scale test equipment by means of measurement,especially the system-level output parameters.Traceability to the approved national metrology standards will ultimately enable effective control of the technical state of the test system.
Starting from the characteristics of test equipment in large-scale test activities,this paper analyzes the metrological traceability of the experimental equipment,analyzes the necessity of conducting quantitative design research on test equipment and proposes the basic method of carrying out quantitative design,which helps the managers,designers,testers,users and maintainers involved in the large-scale test equipment integrate the metrological concept into their own work,and realize the measurement of large-scale test equipment by means of measurement,especially the system-level output parameters.Traceability to the approved national metrology standards will ultimately enable effective control of the technical state of the test system.
引文
[1]北京长城计量测试技术研究所.《装备可计量性设计研究》研究报告[Z].2011.
[2]航空航天部203所.GJB 1309-1991军工产品大型试验计量保证与监督的要求[S].1991.
[3]全国人民代表大会常务委员会.中华人民共和国计量法[M].北京:法律出版社,2018.
[4]国防计量监督管理条例[S].1990.
[5]中国人民解放军计量条例[S].2003.
[6]MIL-STD-1839D Department of Defense Standardpr Actice Calibration And Measurement Requirements[S].2010.
[7]MIL-HDBK-1839A Department of Defense Standardpractice Calibration and Measurement Requirements Handbood[S].2000.
[8]中国人民解放军武器装备管理工作条例[S].2003.
[9]武器装备质量管理条例[S].2010.
[10]周自力,李太景,于亚楠,等.计量性及计量性设计[J].计测技术,2018,38(5):4-7.
[2]航空航天部203所.GJB 1309-1991军工产品大型试验计量保证与监督的要求[S].1991.
[3]全国人民代表大会常务委员会.中华人民共和国计量法[M].北京:法律出版社,2018.
[4]国防计量监督管理条例[S].1990.
[5]中国人民解放军计量条例[S].2003.
[6]MIL-STD-1839D Department of Defense Standardpr Actice Calibration And Measurement Requirements[S].2010.
[7]MIL-HDBK-1839A Department of Defense Standardpractice Calibration and Measurement Requirements Handbood[S].2000.
[8]中国人民解放军武器装备管理工作条例[S].2003.
[9]武器装备质量管理条例[S].2010.
[10]周自力,李太景,于亚楠,等.计量性及计量性设计[J].计测技术,2018,38(5):4-7.