摘要
段彩纱色彩丰富,面料立体感强,但纱线强度较低,花纹图案重现率低,因此难以大批量生产。探究了双色段彩纱单位长度上的色段数对纱线强度的影响,当50 cm纱线内色段数少于5个时,纱线的强度稳定性较好。通过纹织CAD模拟不同投纬方式下段彩纱的织物图案,并与实际织造的段彩纱织物图案进行比较,结果显示两者具有较好的一致性。分析了段彩纱循环长度、各彩段长度比例、投纬方式以及织物幅宽对织物图案的影响。
The segment color yarn features rich in color, and strong three-dimensional effect of its fabric, but it has low production and is difficult to mass-produce rate due to its low tenacity of the yarn and low pattern reproducibility. The effect of the number of color segments per unit length on the yarn tenacity of a two-color segment yarn is explored. When the number of color segments in a 50 cm is less than 5, the yarn has good stability of tenacity. The fabric patterns of different weft insertion patterns are simulated by weaving CAD, and compared with the actual color yarn fabric pattern. The results show the two have good consistency. The influence of the color yarn cycle length, the ratio of the color segment lengths, the weft insertion method, and the fabric width on the pattern is analyzed.
引文
[1]吴国仙,魏茂建.新颖花式纱线的开发[J].纺织导报,2016(2):46-47.
[2]章友鹤,周建迪,赵连英,等.色纺纱线生产与工艺技术创新——我国色纺纱线的生产、品种、性能特点与用途概述[J].现代纺织技术,2016,24(5):61-64.
[3]詹霞,张毅.段彩纱纺纱风格的探讨[J].纺织导报,2016(2):43-45.
[4]章友鹤,赵连英,陈璟.扩大新颖花式(花色)纱线生产,增加纺纱企业效益[J].纺织导报,2015(11):72-75.
[5]史晶晶,杨恩龙,陈伟雄,等.段彩纱纺纱技术浅析[J].棉纺织技术,2013(4):66-68.
[6]陈伟雄,易洪雷,薛元.等线密度环锭纺段彩纱成纱方法及装置:CN102031600A[P].2011-04-27.
[7]徐舒曼,陈倩,易洪雷,等.等线密度段彩纱纺纱工艺设计与分析[J].现代纺织技术,2015,23(4):13-16.
[8]胡佳超,史晶晶,卢宏明,等.等线密度精确段彩纺成纱性能分析[J].现代纺织技术,2014,22(2):1-4.
[9]李变变,史晶晶,胡佳超,等.段彩针织物图案形成机理研究[J].丝绸,2013(5):10-12.
[10]张森林,姜位洪.纹织CAD技术的应用及其发展方向[J].纺织学报,2004(3):126-129.
[11]周赳.纹织CAD系统的应用功能及研发方向[J].纺织导报,2003(2):77-80.
[12]张宝山.CAD技术在面料图案设计中的应用[J].纺织导报,2010(3):100-102.