基于K60的GCPLC系统的设计与实现
|
摘要
提出研制图形构件化可编程逻辑控制器(GCPLC)的方案,它是传统可编程逻辑控制器(PLC)的革新与新模式。与传统PLC相比,GCPLC具有图形拖动编程、开放的二次编程架构、构件组合、开发环境兼容、构件定制扩充、RTOS架构融入等特点。其目标是使GCPLC相对于传统PLC,在技术架构、技术方法、设计思想及实现方式等方面能够有新突破,在应用方面能够逐步取代传统PLC。
This topic proposes the scheme of developing Graphic Component Programmable Logic Controller( GCPLC), which is the innovation and new mode of traditional Programmable Logic Controller( PLC).The GCPLC has many characteristics, for instance,graphical drag programming, open twice programming architecture, component combination, development environment compatible,component extendible and the integration of RTOS.In addition, aimed at obtain breakthrough in technology architecture and method alone with the design ideas, the GCPLC has advantages of less difficulties in terminal-user programming, excellent division in tech-nology and expansion in user-control.The GCPLC will replace traditional PLC in application.
This topic proposes the scheme of developing Graphic Component Programmable Logic Controller( GCPLC), which is the innovation and new mode of traditional Programmable Logic Controller( PLC).The GCPLC has many characteristics, for instance,graphical drag programming, open twice programming architecture, component combination, development environment compatible,component extendible and the integration of RTOS.In addition, aimed at obtain breakthrough in technology architecture and method alone with the design ideas, the GCPLC has advantages of less difficulties in terminal-user programming, excellent division in tech-nology and expansion in user-control.The GCPLC will replace traditional PLC in application.
引文
[1]严奎.嵌入式PLC编程软件开发[J].工业控制计算机,2012,25(10):67-68,70.
[2]张嵩,术守喜,丁广乾.基于ARM的嵌入式PLC的设计[J].自动化与仪器仪表,2008(3):9-10,23.
[3]廖常初.PLC编程及应用(第4版)[M].北京:机械工业出版社,2014.
[4]TROELSEN A.C#与.NET 4高级程序设计[M].北京:人民邮电出版社,2011.
[5]王宜怀.嵌入式系统原理与实践:ARM Cortex-M4 Kinetis微控制器[M].北京:电子工业出版社,2012.
[6]吴玉香,周东霞,林锦赟.嵌入式软PLC系统的研究和实现[J].计算机工程,2009(10).
[7]谢春杰.嵌入式软PLC的研究与设计[D].南京:南京理工大学,2014.
[8]郭建勋.嵌入式软PLC开发系统的设计[D].广州:华南理工大学,2010.
[9]PRATUMSUWAN P,PONGAEN W.An embedded PLC development for teaching in mechatronics education[J].Industrial Electronics&Applications,IEEE,2011(6):1477-1481.
[10]艾春丽,刘荣鹏,张凤登.基于软PLC的多任务并行控制系统的实时性研究[J].计算机应用,2007,27(12):272-274.
[2]张嵩,术守喜,丁广乾.基于ARM的嵌入式PLC的设计[J].自动化与仪器仪表,2008(3):9-10,23.
[3]廖常初.PLC编程及应用(第4版)[M].北京:机械工业出版社,2014.
[4]TROELSEN A.C#与.NET 4高级程序设计[M].北京:人民邮电出版社,2011.
[5]王宜怀.嵌入式系统原理与实践:ARM Cortex-M4 Kinetis微控制器[M].北京:电子工业出版社,2012.
[6]吴玉香,周东霞,林锦赟.嵌入式软PLC系统的研究和实现[J].计算机工程,2009(10).
[7]谢春杰.嵌入式软PLC的研究与设计[D].南京:南京理工大学,2014.
[8]郭建勋.嵌入式软PLC开发系统的设计[D].广州:华南理工大学,2010.
[9]PRATUMSUWAN P,PONGAEN W.An embedded PLC development for teaching in mechatronics education[J].Industrial Electronics&Applications,IEEE,2011(6):1477-1481.
[10]艾春丽,刘荣鹏,张凤登.基于软PLC的多任务并行控制系统的实时性研究[J].计算机应用,2007,27(12):272-274.