T酸二次水洗涤贮槽的设计
|
摘要
依据T酸二次水洗涤贮槽的工业参数,进行洗涤贮槽的设计计算,进行了卧式容器、封头和卧式容器(双鞍座)设计计算,计算出了所需强度及壁板厚度等,并对设计计算结果进行了校核,校核结果均达到了设计要求。
According to the industrial parameters of T-acid secondary water washing tank, the design and calculation of washing tank are carried out. The design calculation of horizontal vessel, head and horizontal vessel(double saddle) is carried out, the required strength and wall thickness are calculated, and the design calculation results are checked. The verification results have reached the design requirements.
According to the industrial parameters of T-acid secondary water washing tank, the design and calculation of washing tank are carried out. The design calculation of horizontal vessel, head and horizontal vessel(double saddle) is carried out, the required strength and wall thickness are calculated, and the design calculation results are checked. The verification results have reached the design requirements.
引文
[1]张盛汉,陈泉源,柳欢欢.酸废母液蒸氨预处理的动力学研究[J].中国环境科学,2014,34(1):85-90.
[2]汪印,柏承志,苏宏,等.T酸一次洗水初步处理的研究[J].化工环境,1998,18(5):263-268.
[3]邹培,陈泉源,张盛汉,徐万福.络合萃取法处理H酸、T酸生产废水[J].环境工程,2013,31:226-228.
[4]胡明一,何承华.矩形常压液体贮槽的强度刚度设计[J].技术应用与发展,2007,4:31-34.
[5]王际强,陈杰.大型低温液体贮槽绝热系统设计[J].深冷技术,2011,2:37-41.
[6]刘春雷,李锡华.球冠形中间封头设计计算[J].石油化工设备,2014,43(5):36-39.
[7]李伟良.大型立式容器腿式支座的设计计算[J].石油和化工设备,2015(18):36-39.
[2]汪印,柏承志,苏宏,等.T酸一次洗水初步处理的研究[J].化工环境,1998,18(5):263-268.
[3]邹培,陈泉源,张盛汉,徐万福.络合萃取法处理H酸、T酸生产废水[J].环境工程,2013,31:226-228.
[4]胡明一,何承华.矩形常压液体贮槽的强度刚度设计[J].技术应用与发展,2007,4:31-34.
[5]王际强,陈杰.大型低温液体贮槽绝热系统设计[J].深冷技术,2011,2:37-41.
[6]刘春雷,李锡华.球冠形中间封头设计计算[J].石油化工设备,2014,43(5):36-39.
[7]李伟良.大型立式容器腿式支座的设计计算[J].石油和化工设备,2015(18):36-39.