摘要
本文将山西兴盛鸿发煤业有限公司煤矿主井、风井的贯通测量作为研究对象,设计了地面控制测量、地面水准测量、井下陀螺定向与联系测量及井下导向测量方案。通过实施得出高程闭合差为78mm,方位角闭合差为26″,坐标闭合差均小于30mm,均满足了煤矿贯通测量的规定,对于类似工程的贯通测量有一定的参考意义。
This paper takes the survey of the main well and wind well of Shanxi Xingshenghong Coal Industry Co., Ltd. as the research object, designs the ground control measurement, ground level measurement, downhole gyro orientation and connection measurement and downhole orientation measurement scheme, and adopts the implementation scheme. The resulting elevation closure difference is 78 mm, azimuth closure difference is 26″, and the coordinate closure difference is less than 30 mm. All of them meet the requirements of coal mine penetration measurement, and have certain reference significance for the penetration measurement of similar projects.
引文
[1]马骥,杨志强,石震.柠条塔超长巷道磁悬浮陀螺导线贯通误差预计方法研究[J].煤矿开采,2016,21(02):103-105+82.
[2]王晋林,况建设.测点极不稳定情况下跨采区工作面贯通测量工作实践[J].煤炭技术,2008(05):124-125.
[3]赵国梁,赵兵朝,张惠军,等.巷道贯通测量中GPS和常规导线测量成果的可靠性互检[J].矿山测量,2008(03):59-61.
[4]梁泽生.矿井巷道的设计需要作局部修改时贯通测量数据的处理计算[J].矿山测量,1983(02):2-6+8.
[5]王金海.光电测距仪传递高程技术在采区测量中的应用[J].建井技术,2014,35(01):53-54+57.
[6]米绍文.山西王家岭煤矿主、副平硐超长巷道恢复永久井下测量控制系统精度的分析[J].矿山测量,2013(06):77-79.