摘要
系统地介绍了西门子S120伺服驱动器与802D数控系统的电气连接方法,以CK6140数控车床伺服系统调试为例,研究了S120伺服驱动器控制要求,并基于西门子PLC程序实现了伺服驱动器控制要求。最后,基于西门子802D系统介绍了伺服系统的调试方法,完成了CK6140数控车床伺服系统调试。
This paper systematically introduces the electrical connection method between Siemens S120 servo driver and 802 D CNC system. Taking the servo system debugging of CK6140 NC lathe as an example, the control requirements of S120 servo driver are studied, and based on Siemens PLC program, the servo driver control requirement is realized. Finally, based on Siemens 802 D system, the method of servo system debugging is introduced, and the CK6140 CNC lathe servo system debugging is completed.
引文
[1] 张池,王新娜.基于西门子S120变频器造纸机拖动系统设计[J].电气时代,2016(9):62-65.
[2] 张勇,刘东海.Sinamics S120驱动器的连接与调试[J].数字技术与应用,2013(9):11,13.
[3] 张斌,解岩,童小建,等.浅谈西门子S120驱动器在锯钻机床行业的应用[J].科技展望,2016(25):141.
[4] 王传军,李怀珍,方栋梁.Sinamics S120在伺服系统测试中的应用[J].电机与控制应用,2018(7):93-96.
[5] 陈炳森,胡华丽.西门子802D数控系统PLC编程与应用[J].装备制造技术,2008(9):148-151.
[6] 雷楠南.西门子802D系列伺服系统PLC编程及故障排除[J].濮阳职业技术学院学报,2018(3):55-57.
[7] 龚仲华.西门子数控系统PLC程序典例[M].北京:机械工业出版社,2015:166-170.