SOPTA顶管机生产工艺控制技术的应用
|
摘要
介绍CPE生产线最新配置SOPTA顶管机生产工艺优化系统的组成以及功能,对比去除咬钢冲击后的SOPTA顶管机生产工艺优化系统的计算电流与实测平均电流,并分析SOPTA顶管机生产工艺优化系统的优势。分析认为:SOPTA顶管机生产工艺优化系统的计算电流与实测数据基本一致,具有计算准确、自动化、运行高效安全等特点。
The compositon and function of the SOPTA CPE process optimization system newly equipped to the CPE produciton line are introduced. The electric currents(removing the billet biting impact part) calculated by SOPTA system and the actual average current measurements are compared, and the advantages of SOPTA CPE process optimization system are analyzed. The analysis leads to such a conclusion that the electric currents calculated by SOPTA system and the actual current measurements are basically the same,and the system has the charateristics such as accurate calculation,automization as well as highly-efficient and safe operation.
The compositon and function of the SOPTA CPE process optimization system newly equipped to the CPE produciton line are introduced. The electric currents(removing the billet biting impact part) calculated by SOPTA system and the actual average current measurements are compared, and the advantages of SOPTA CPE process optimization system are analyzed. The analysis leads to such a conclusion that the electric currents calculated by SOPTA system and the actual current measurements are basically the same,and the system has the charateristics such as accurate calculation,automization as well as highly-efficient and safe operation.
引文
[1]金如崧.无缝钢管百年史话[M].北京:冶金工业出版社,2008.
[2]周继洪.国内CPE机组生产现状及发展初探[J].钢管,2016,45(6):70-73.
[3]彭龙洲,段炜,余邦键.CPE工艺的特点及发展趋势刍议[J].钢管,2012,41(4):12-17.
[4]熊明祥,李鹏.拟建Φ168 mm CPE热轧无缝钢管生产线的工艺方案[J].钢管,2012,41(5):57-61.
[5]陈俊杰,郝润元.CPE顶管机的孔型计算[J].钢管,2013,42(2):32-36.
[6]杨力,张增全,高瑞全.对CPE机组生产无缝钢管技术的再认识[J].钢管,2013,42(3):55-58.
[7]魏贤宇.Φ102 mm CPE顶管机组的创新及效果[J].钢管,2008,37(5):55-58.
[8]李群.CPE工艺改良刍议[J].钢管,2015,44(5):71-73.
[9]王奎,汪浩,彭福本,等.CPE顶管机组热轧HRSG用超长薄壁管的开发[J].钢管,2015,44(5):37-41.
[10]李珺,许才斌,郑臻,等.CPE机组上CB110-5Cr抗CO2腐蚀油套管的研发[J].钢管,2016,45(2):23-27.
[11]郑臻,许才斌,马辉,等.Φ114 mm CPE机组高精度小直径薄壁管的生产[J].钢管,2016,45(4):51-54.
[2]周继洪.国内CPE机组生产现状及发展初探[J].钢管,2016,45(6):70-73.
[3]彭龙洲,段炜,余邦键.CPE工艺的特点及发展趋势刍议[J].钢管,2012,41(4):12-17.
[4]熊明祥,李鹏.拟建Φ168 mm CPE热轧无缝钢管生产线的工艺方案[J].钢管,2012,41(5):57-61.
[5]陈俊杰,郝润元.CPE顶管机的孔型计算[J].钢管,2013,42(2):32-36.
[6]杨力,张增全,高瑞全.对CPE机组生产无缝钢管技术的再认识[J].钢管,2013,42(3):55-58.
[7]魏贤宇.Φ102 mm CPE顶管机组的创新及效果[J].钢管,2008,37(5):55-58.
[8]李群.CPE工艺改良刍议[J].钢管,2015,44(5):71-73.
[9]王奎,汪浩,彭福本,等.CPE顶管机组热轧HRSG用超长薄壁管的开发[J].钢管,2015,44(5):37-41.
[10]李珺,许才斌,郑臻,等.CPE机组上CB110-5Cr抗CO2腐蚀油套管的研发[J].钢管,2016,45(2):23-27.
[11]郑臻,许才斌,马辉,等.Φ114 mm CPE机组高精度小直径薄壁管的生产[J].钢管,2016,45(4):51-54.