摘要
快速成型技术(Rapid Prototyping),简称RP,是以材料堆积法的一种全新制造技术。它自上世纪80年代后期出现,就被誉为"第三次工业革命"。与传统制造工艺相比,快速成型技术以其众多优点,很快应用于医疗行业,在口腔正畸中的应用为正畸技术发展带来又一次的革新。本文就快速成型技术和特点,及其在个性化托槽、正畸模型、转移托盘、支抗钉植入的应用作一综述。
Rapid prototyping technology was based on a new method of manufacturing technical material accumulation. It had since the late 1980 s, it was known as the "third industrial revolution." Compared with traditional manufacturing processes, rapid prototyping technology for its many advantages, and soon used in the medical industry, used in orthodontic again to bring innovative orthodontic technology. In this paper, rapid prototyping technology and features, and personalized brackets, orthodontic models, the transfer tray, anchorage nail implant applications are reviewed.
引文
[1]Lantada AD,Morgado PL.Rapid prototyping for biomedical engineering:current capabilities and challenges[J].Annu Rev Biomed Eng,2012,14:73-96.
[2]Haverman TM,Karagozoglu KH,Prins HJ,et al.Rapid prototyping:a very promising method[J].Ned Tijdschr Tandheelkd,2013,120(3):136-141.
[3]Wiechmann D,Rummel V,Thalheim A,et al.Customized brack-ets and archwires for lingual orthodontic treatment[J].Am J OrthodDentofacial Orthop,2003,124:593-593.
[4]王淑范,杨永强.舌侧托槽的数字化3D打印技术[J].广东牙病防治,2013,21(8):408-411.
[5]Radeke J,von der Wense C,Lapatki BG.Comparison of orthodontic measurements on dental plaster casts and 3D scans[J].J Orofac Orthop,2014,75(4):264-274.
[6]Kasparova M,Grafova L,Dvorak P,et al.Possibility of reconstruction of dental plaster cast from 3D digital study models[J].Biomed Eng Online,2013,31;12:49.
[7]Ali SA,Miethke HR,Invisalign.An innovative invisible orthodontic appliance to correct malocclusions:advantages and limitations[J].Dent Update,2012,39(4):254-256,258-260.
[8]Ciuffolo F,Epifania E,Duranti G,et al.Rapid prototyping:a new method of preparing trays for indirect bonding[J].Am J Orthod Dento-facial Orthop,2006,129(1):75-77.
[9]郭宏铭,陈慧,周晶.数字化整合模型和激光快速成型技术在舌侧间接粘接系统中的初步应用[J].北京口腔医学,2011,19(2):95-97.
[10]孙应明,张梦洁,王小波.三维模板定位引导正畸微种植体植入的成功率[J].中国组织工程研究与临床康复,2011,15(39):7247-7250.
[11]Kwon SY,Kim Y,Ahn HW,et al.Computer-Aided Designing and Manufacturing of Lingual Fixed Orthodontic Appliance Using2D/3D Registration Software and Rapid Prototyping[J].Int J Dent,2014:164.