摘要
在移动互联网时代,工业网络控制技术得到快速发展,工业软总线技术成为新的网络控制理论架构的关键技术之一。在高校工业网络控制课程中引入工业软总线是技术发展和应用型工业信息化人才培养的客观需要,文章提出了基于工业软总线的课程教学方法,重构了理论教学模型,并协同设计了教学和能力培养体系。
In the era of mobile Internet, the industrial network control technology has developed rapidly,and the industrial software bus technology has become one of the key technologies in the new network control theory architecture. The introduction of industrial software bus in the course of industrial network control in universities is an objective requirement for the development of technology and the cultivation of application-oriented industrial informatization talents. This paper puts forward the course teaching method based on industrial software bus, reconstructs the theoretical teaching model, and collaboratively designs the teaching and the ability training system.
引文
[1]邵鹏飞,Bruce,Boyee,等.基于软总线Lab Map的松耦合分布式控制系统研究[J].计算机测量与控制,2007,15(11):1531-1533.
[2]胡毅,于东,刘明烈.工业控制网络的研究现状及发展趋势[J].计算机科学,2010,37(1):23-27.
[3]夏继强,邢春香.现场总线工业控制网络技术[M].北京航空航天大学出版社,2005.
[4]宋启波.工业网络控制系统多协议通信技术研究[D].济南大学,2016.
[5]Zum Beck R,Kazakov D,Bruce-Boye C,et al.Middleware based distributed heterogeneous simulation for the steel industry[C]//Emerging Technologies&Factory Automation(ETFA),2011 IEEE 16th Conference on.IEEE,2011:1-4.
[6]冯冬芹,金建祥,褚健.Ethernet与工业控制网络[J].仪器仪表学报,2003,24(1):23-26.