特定载荷下不同凸度量对数滚子疲劳寿命试验

详细信息    查看全文 | 推荐本文 |

英文篇名：Fatigue Life Test on Logarithmic Rollers with Different Crowning Values Under Specific Load 作者：周立业 ; 陈晓阳 ; 陆锦才 英文作者：Zhou Liye;Chen Xiaoyang;Lu Jincai;School of Mechatronics Engineering and Automation,Shanghai University;Shanghai Hejin Roller Technology Co.,Ltd.; 关键词：圆柱滚子轴承 ; 滚子凸度量 ; 疲劳寿命 ; 边缘效应 ; 优化设计 英文关键词：cylindrical roller bearing;;crowning value of roller;;fatigue life;;edge effect;;optimal design 中文刊名：CUCW 英文刊名：Bearing 机构：上海大学机电工程与自动化学院;上海和锦滚子科技有限公司; 出版日期：2017-09-05 出版单位：轴承 年：2017 期：No.454 语种：中文; 页：CUCW201709008 页数：5 CN：09 ISSN：41-1148/TH 分类号：30-34

摘要

分析圆柱滚子轴承滚子凸度对轴承疲劳寿命的影响。针对工程实际应用中特定载荷工况下滚子所需最佳凸度量问题,选取不同凸度量的滚子,对单个滚子进行加速寿命试验。结果表明:在相同载荷下,不同凸度量滚子的疲劳寿命存在一定规律,一定载荷下存在一个最佳凸度,高于或低于这个最佳凸度的滚子疲劳寿命都有不同程度的缩短。
        The influence of roller crowning on fatigue life of cylindrical roller bearings is analyzed. Aiming at optimal crowning value of rollers under specific load in practical engineering application,the rollers with different crowning values are selected,and the accelerated life test is carried out for single roller. The results show that the fatigue life of rollers with different crowning values has a certain rule under same load,and there is an optimal crowning under certain load. The fatigue life of rollers is reduced with different degree when the crowning of rollers is greater or less than optimal crowning.

引文

[1]Lundberg G,Palmgren A.Dynamic Capacity of Rolling Bearings[J].Acta Polytechnica Scandinavica Mechanical Engineering Series,1947,l(3).
    [2]Reusner H.The Logarithmic Roller Profile—The Key to Superior Performance of Cylindrical and Taper Roller Bearings[J].Ball Bearing Journal,1987,230:2-10.
    [3]马家驹.滚子凸度设计[J].轴承,1992(1):11-15.
    [4]马家驹,徐文,刘双表,等.对数滚子工程设计[J].轴承,1997(6):2-5.
    [5]周越.滚子轴承受力CAA系统开发及弹流润滑试验机研制[D].上海:上海大学,2016.
    [6]张剑,刘蕾,陈晓阳.轴承滚子四线摩擦副滚动接触疲劳寿命试验台架设计[J].轴承,2011(11):47-49.