考虑运动副间隙的异形罐封罐机构仿真分析

详细信息    查看全文 | 推荐本文 |

英文篇名：Irregular Cans Sealing Mechanism Simulation Analysis Considering Kinematic Pair Clearance 作者：刘艺博 ; 张广文 英文作者：LIU Yi-bo;ZHANG Guang-wen;College of Mechanical Engineering,North China University of Science & Technology; 关键词：运动副间隙 ; ADAMS ; 异形罐 ; 运动学 英文关键词：kinematic pair clearance;;ADAMS;;irregular cans;;kinematics 中文刊名：SXJX 英文刊名：Mechanical Engineering & Automation 机构：华北理工大学机械工程学院; 出版日期：2019-03-26 08:53 出版单位：机械工程与自动化 年：2019 期：No.213 语种：中文; 页：SXJX201902030 页数：2 CN：02 ISSN：14-1319/TH 分类号：84-85

摘要

以某型号的异形罐封罐机构为研究对象,应用Creo Parametric软件建立异形罐封罐机构三维模型,然后运用ADAMS软件分别进行含运动副间隙和无间隙两种状态的仿真,分析间隙对封罐机构运动规律的影响。分析结果表明:运动副间隙对卷封滚轮位移影响较小,对速度和加速度影响明显。研究结果为封罐机的优化设计提供了参考。
        A certain type of irregular can sealing mechanism is taken as the research object,and the three-dimensional model of the irregular can sealing mechanism is set up by use of Creo Parametric software.Then the ADAMS software is used to simulate the mechanism in two states,which are with clearance and without clearance,and the influence of the gap on the motion law of the sealing mechanism is analyzed.The results show that the kinematic pair clearance has little effect on the displacement of sealing roller,but it has obvious influence on the velocity and acceleration of sealing roller.The research results provide a reference for the optimization design of the sealing machine.

引文

[1]何雪明,何楷,武美萍,等.基于冲击模型的含间隙高速凸轮机构动力学分析[J].食品与机械,2017,33(9):84-89.
    [2]曹巨江,陆武慧,马超.工业平缝机针杆机构铰链间隙仿真分析[J].机械设计与制造,2014(10):200-202.
    [3]易敏.考虑转动副间隙曲柄滑块机构动力学仿真与可靠性分析[D].武汉:华中科技大学,2016:10-43.
    [4]高德.包装机械设计[M].北京:化学工业出版社,2005.
    [5]黄华军,张春,金鑫,等.含运动副间隙的涡旋压缩机动平衡仿真研究[J].振动与冲击,2016,35(5):125-130.
    [6]于春玲.含间隙弧面凸轮分度机构的ADAMS动力学仿真[J].机械传动,2011,35(6):41-43.
    [7]席晓燕.考虑铰链间隙和连杆柔性推料机构运动学分析[J].包装工程,2017,38(5):136-140.