高精度多孔大跨距同轴度测量关键技术综述
|
摘要
多孔大跨距同轴度误差直接影响传动的精度与可靠性,不仅使传动过程的附加载荷增加,而且会造成振动噪声高,严重影响设备的正常运行。本文针对高精度多孔大跨距同轴度测量问题,在分析目前技术问题的基础上,探讨解决高精度大跨距同轴度测量方法的关键技术,为开发高精度多孔大跨距同轴度测量系统提供思路。
The measurement accuracy of coaxiality error of long-span porous parts directly affects the accuracy and reliability of transmissions. As a result of the accuracy error,the additional load in transmission process and the vibration noise level are increased,and the normal operation of the equipment is affected seriously. Aiming at problems and difficulties of high precision coaxiality measurement for longspan porous parts and according to the analysis of current technical problems,this paper probes into the key technologies of the measuring method and provides new ideas and approaches to develop the high precision coaxiality measuring system for long-span porous parts.
The measurement accuracy of coaxiality error of long-span porous parts directly affects the accuracy and reliability of transmissions. As a result of the accuracy error,the additional load in transmission process and the vibration noise level are increased,and the normal operation of the equipment is affected seriously. Aiming at problems and difficulties of high precision coaxiality measurement for longspan porous parts and according to the analysis of current technical problems,this paper probes into the key technologies of the measuring method and provides new ideas and approaches to develop the high precision coaxiality measuring system for long-span porous parts.
引文
[1]汪家铭.旋转机械的激光对中[J].汽轮机技术,1994,6(2):126-128.
[2]全国产品尺寸和几何技术规范标准化技术委员会.GB/T1182—2008产品几何技术规范(GPS)几何公差形状、方向、位置和跳动公差标注[S].北京:中国标准出版社,2008:1-48.
[3]机械科学研究院.JB/T7557—1994,同轴度误差检测[S].北京:机械科学研究院,1995:1-15.
[4]张辉,任浩,陈理锋等.基于三坐标测量机同轴度的测量方法[J].现代制造技术与装备,2010(5):27-28.
[5]杨蓉.测量多孔同轴度时孔径变化的影响与分析[J].内燃机,2004(2):29-30.
[6]徐兵.同轴度的测量与校准[J].机械制造,2005,491(43):6466.
[7]邢杰.轴孔类零件同轴度误差的检测探讨[J].重型汽车,2001(2):20-21.
[8]叶宗茂.用三坐标测量机正确测量同轴度误差[J].工具技术,2007(3):77-80.
[9]郭振英,庞瑞华等,DTZ-1型大尺寸同轴度仪的研制[J].计量技术,1988(11):10-12.
[10]袁忠伟.大型工件上两孔同轴度测量[J].计量技术,1995(9):9-11.
[11]CHEN Qianghua,LIU Dejiao.Straightness/coaxiality measurement system with transverse Zeeman dual-frequency laser[J].Measurement Science and Technology,2005(16):2030-2037.
[12]ANSSI M KYNEN,TARMO RUOTSALAINEN.CMOS compatible position-sensitive devices(PSDs)based on photodetector arrays[J].Sensors and Actuators A:Physical,2003,105(3):261-270.
[13]那云霄,陈海燕,高中文.一个基于CCD的同轴度测量仪[J].哈尔滨理工大学学报,1999(06):21-23.
[14]WANG Tingyu,LU Naiguang.A CMOS approach to Coaxiality Measurement of Marine[C].2008 International Conference on Optical Instruments and Technology:Optoelectronic Measurement Technology and Applications,2009.
[15]吴斌,王庆锋,何存富.基于PSD技术的孔-孔同轴度测量仪的研制[J].工业仪表与自动化装置,2006(3):69-71.
[16]余厚云,赵转萍,陆永华.基于PSD的长跨度孔系同轴度误差测量系统[J].传感器与微系统,2013,32(2):70-73.
[17]连强强.大距离分布孔系尺寸和同轴度检测系统的设计[D].南京:南京航天航空大学,2011.
[18]张丰.激光准直测量系统校准方法研究[D].天津:天津大学,2012.
[19]全国形状和位置公差标准化技术委员会.GB/T 8069—1998,功能量规[S].北京:中国标准出版社,1998:1-25.
[2]全国产品尺寸和几何技术规范标准化技术委员会.GB/T1182—2008产品几何技术规范(GPS)几何公差形状、方向、位置和跳动公差标注[S].北京:中国标准出版社,2008:1-48.
[3]机械科学研究院.JB/T7557—1994,同轴度误差检测[S].北京:机械科学研究院,1995:1-15.
[4]张辉,任浩,陈理锋等.基于三坐标测量机同轴度的测量方法[J].现代制造技术与装备,2010(5):27-28.
[5]杨蓉.测量多孔同轴度时孔径变化的影响与分析[J].内燃机,2004(2):29-30.
[6]徐兵.同轴度的测量与校准[J].机械制造,2005,491(43):6466.
[7]邢杰.轴孔类零件同轴度误差的检测探讨[J].重型汽车,2001(2):20-21.
[8]叶宗茂.用三坐标测量机正确测量同轴度误差[J].工具技术,2007(3):77-80.
[9]郭振英,庞瑞华等,DTZ-1型大尺寸同轴度仪的研制[J].计量技术,1988(11):10-12.
[10]袁忠伟.大型工件上两孔同轴度测量[J].计量技术,1995(9):9-11.
[11]CHEN Qianghua,LIU Dejiao.Straightness/coaxiality measurement system with transverse Zeeman dual-frequency laser[J].Measurement Science and Technology,2005(16):2030-2037.
[12]ANSSI M KYNEN,TARMO RUOTSALAINEN.CMOS compatible position-sensitive devices(PSDs)based on photodetector arrays[J].Sensors and Actuators A:Physical,2003,105(3):261-270.
[13]那云霄,陈海燕,高中文.一个基于CCD的同轴度测量仪[J].哈尔滨理工大学学报,1999(06):21-23.
[14]WANG Tingyu,LU Naiguang.A CMOS approach to Coaxiality Measurement of Marine[C].2008 International Conference on Optical Instruments and Technology:Optoelectronic Measurement Technology and Applications,2009.
[15]吴斌,王庆锋,何存富.基于PSD技术的孔-孔同轴度测量仪的研制[J].工业仪表与自动化装置,2006(3):69-71.
[16]余厚云,赵转萍,陆永华.基于PSD的长跨度孔系同轴度误差测量系统[J].传感器与微系统,2013,32(2):70-73.
[17]连强强.大距离分布孔系尺寸和同轴度检测系统的设计[D].南京:南京航天航空大学,2011.
[18]张丰.激光准直测量系统校准方法研究[D].天津:天津大学,2012.
[19]全国形状和位置公差标准化技术委员会.GB/T 8069—1998,功能量规[S].北京:中国标准出版社,1998:1-25.