电力系统通信规约库抽象设计与实现
|
摘要
为了提高电力系统通信规约开发效率、简化开发流程、保证规约一致性,介绍了传统电力规约通信库的软件框架设计,包括数据结构设计、服务接口统一、内部实现等,提炼出通用的数据结构及服务接口。以IEC103规约为例,详细介绍了该通信库的设计与实现,包括报文发送、报文接收、报文分帧处理等的实现细节。应用结果表明,该设计方法实用性强,达到了预期设计目的,对电力系统通信规约开发具有一定的参考价值。
In order to improve the development efficiency of the power system communication protocol, simplify the development process, and guarantee the consistency of the communication protocol, the design of the software framework of the traditional power system protocol communication library is introduced, including data structure design, service interface unification and internal implementation, etc., and the general data structure and service interface are extracted. IEC103 protocol was taken as an example, the design and implementation of the communication protocol library were described in detail, including message sending, message receiving,message frame processing, etc. The application of the protocol library shows that the design method is very practical, achieves the intended purpose, and has certain reference value for the development of power system communication protocol.
In order to improve the development efficiency of the power system communication protocol, simplify the development process, and guarantee the consistency of the communication protocol, the design of the software framework of the traditional power system protocol communication library is introduced, including data structure design, service interface unification and internal implementation, etc., and the general data structure and service interface are extracted. IEC103 protocol was taken as an example, the design and implementation of the communication protocol library were described in detail, including message sending, message receiving,message frame processing, etc. The application of the protocol library shows that the design method is very practical, achieves the intended purpose, and has certain reference value for the development of power system communication protocol.
引文
[1]于海.电力规约通用测试系统的研究与实现[D].南京:南京信息工程大学,2013.
[2]蒋湘涛,贺建飚,李楠.电力信息采集的通用型通信规约解析系统研究与设计[J].电力系统保护与控制,2012,40(9):118-122.
[3]张磊,陈宏君,吴相楠,等.基于扩展103规约的保护装置通信与调试系统设计[J].电力系统保护与控制,2015,43(21):126-130.
[4]满令伍.IEC60870-5-103规约在变电站后台监控系统中的应用研究与实现[D].济南:山东大学,2014.
[5]远动设备与系统第五部分传输规约第二篇链路传输规则:IEC 60870-5-2[S].
[6]冯利虎,陈干杰,杨静,等.IEC104规约应用协议控制信息测试内容及方法研究[J].测控技术,2017,36(12).
[7]姬希娜,浮明军,杨生苹.国家电网以太网103规约测试工具的设计与实现[J].测控技术,2016,35(12):114-117.
[2]蒋湘涛,贺建飚,李楠.电力信息采集的通用型通信规约解析系统研究与设计[J].电力系统保护与控制,2012,40(9):118-122.
[3]张磊,陈宏君,吴相楠,等.基于扩展103规约的保护装置通信与调试系统设计[J].电力系统保护与控制,2015,43(21):126-130.
[4]满令伍.IEC60870-5-103规约在变电站后台监控系统中的应用研究与实现[D].济南:山东大学,2014.
[5]远动设备与系统第五部分传输规约第二篇链路传输规则:IEC 60870-5-2[S].
[6]冯利虎,陈干杰,杨静,等.IEC104规约应用协议控制信息测试内容及方法研究[J].测控技术,2017,36(12).
[7]姬希娜,浮明军,杨生苹.国家电网以太网103规约测试工具的设计与实现[J].测控技术,2016,35(12):114-117.