摘要
为满足新机VME总线模块电路板深修的需要,基于VME总线接口协议芯片SCV64,开发了具有接收VME总线信号读写操作功能的从模块。该从模块可实现对机上VME总线模块通信能力检测。给出其硬件架构与各部分电路设计,基于Verilog语言对其读写功能进行软件开发,并给出其硬件设计与软件开发过程中需要注意的问题。对从模块功能进行测试,测试结果表明其功能有效。研制的VME总线从模块能够为后续VME总线模块的测试与维修提供技术支撑。
In order to meet the needs of the deep repair of the VME bus module circuit board on the new aircraft, based on the VME bus interface protocol chip SCV64, a slave module that accepts the VME bus signal read/write operation function has been developed. The slave module can detect the communication capability of the on-board VME bus module. The hardware architecture and various circuit designs are given. The software is developed based on Verilog HDL. The issues that need to be addressed during the hardware design and software development process are described. The slave module was tested and the results showed that its function was available. The developed VME bus slave module can provide technical support for testing and repairing VME bus modules in subsequent new models.
引文
[1]王斌峰.基于ARM的VME总线嵌入式控制器研制[D].哈尔滨:哈尔滨工业大学,2016.
[2]王聪.基于MPC8536的VME总线嵌入式控制器研制[D].哈尔滨:哈尔滨工业大学,2015.
[3]苏俊博,刘旺锁.基于SCV64的VME总线系统研究[J].船电技术,2009,29(8):36-39.
[4]姜茂仁,杨航,赵冬梅,等.飞行管理计算机总线数据采集系统设计与可靠性优化[J].测控技术,2016,35(10).
[5]王新模.VME总线控制器开发[D].武汉:华中科技大学,2011:48-49.
[6]张常江,宋法质,宋跃,等.基于VME总线的光刻机多板卡通信接口设计[J].自动化技术与应用,2016,35(5).
[7]韩记晓,万勇利,张常江,等.基于FPGA的VME自定义总线接口设计[J].自动化技术与应用,2016,35(4).