大采高综放工作面末采位置优化研究
|
摘要
以塔山矿8110工作面为研究对象,对大采高综放工作面末采位置的优化展开研究。对关键层中"砌体梁"与"悬臂梁"结构进行分析,对比3种不同末采位置下采场顶板结构回转形态;建立厚煤层整层煤回采关键层力学模型,确定了老顶的稳定条件;结合实际微地震得到的超前支承压力曲线与现场观测数据,确定8110工作面进入实煤区50 m,且进入实煤区后,周期来压步距增大、强度减小,有利于工作面停采,提高回采率,经济安全效益显著。
Taking 8110 work face of Tashan Mine as the research object, the optimization of the final mining position of the fully mechanized caving working face with large mining height was studied.The structure of "masonry beam" and "cantilever beam" in the key layer was analyzed, and the roof structure of stope under three different positions of final mining was compared.The mechanical model of key seam in thick coal seam was established and the stability condition of old roof was determined.Combined with the actual microseismic pressure curve of the advanced support and field observation data, it was determined that the 8110 work face advanced into the solid coal area 50 m, and after advancing into the solid coal area, the periodic pressure step increased and the intensity decreased, which is conducive to the stoppage of work face, improving the recovery rate, and achieving significant economic and safety benefits.
Taking 8110 work face of Tashan Mine as the research object, the optimization of the final mining position of the fully mechanized caving working face with large mining height was studied.The structure of "masonry beam" and "cantilever beam" in the key layer was analyzed, and the roof structure of stope under three different positions of final mining was compared.The mechanical model of key seam in thick coal seam was established and the stability condition of old roof was determined.Combined with the actual microseismic pressure curve of the advanced support and field observation data, it was determined that the 8110 work face advanced into the solid coal area 50 m, and after advancing into the solid coal area, the periodic pressure step increased and the intensity decreased, which is conducive to the stoppage of work face, improving the recovery rate, and achieving significant economic and safety benefits.
引文
[1] 文志杰,赵晓,尹立明等.大采高顶板控制模型及支架合理承载研究[J].采矿与安全工程学报,2010(2)
[2] 郭卫彬,刘长友,吴锋锋等.坚硬顶板大采高工作面压架事故及支架阻力分析[J].煤炭学报,2014(7)
[3] 王家臣.我国放顶煤开采的工程实践与理论进展[J].煤炭学报,2018(1)
[4] 梁运培,李波,袁永等.大采高综采采场关键层运动型式及对工作面矿压的影响[J].煤炭学报,2017(6)
[5] 鞠金峰,许家林,王庆雄.大采高采场关键层“悬臂梁”结构运动型式及对矿压的影响[J].煤炭学报,2011(12)
[6] 汪永茂,李颖,王经明等.煤壁矿压测定及其在沿空掘进中的应用[J].岩石力学与工程学报,2005(19)
[7] 张明,姜福兴,李克庆等.重复采动停采边界关键层失稳诱发灾害研究[J].中国矿业大学学报,2016(5)
[8] 王晓振,鞠金峰,许家林.神东浅埋综采面末采段让压开采原理及应用[J].采矿与安全工程学报,2012(2)
[9] 王志强,赵景礼,张宝优等.错层位巷道布置放顶煤开采关键层的稳定特征[J].煤炭学报,2008(9)
[10] 钱鸣高,许家林.覆岩采动裂隙分布的“O”形圈特征研究[J].煤炭学报,1998(5)
[2] 郭卫彬,刘长友,吴锋锋等.坚硬顶板大采高工作面压架事故及支架阻力分析[J].煤炭学报,2014(7)
[3] 王家臣.我国放顶煤开采的工程实践与理论进展[J].煤炭学报,2018(1)
[4] 梁运培,李波,袁永等.大采高综采采场关键层运动型式及对工作面矿压的影响[J].煤炭学报,2017(6)
[5] 鞠金峰,许家林,王庆雄.大采高采场关键层“悬臂梁”结构运动型式及对矿压的影响[J].煤炭学报,2011(12)
[6] 汪永茂,李颖,王经明等.煤壁矿压测定及其在沿空掘进中的应用[J].岩石力学与工程学报,2005(19)
[7] 张明,姜福兴,李克庆等.重复采动停采边界关键层失稳诱发灾害研究[J].中国矿业大学学报,2016(5)
[8] 王晓振,鞠金峰,许家林.神东浅埋综采面末采段让压开采原理及应用[J].采矿与安全工程学报,2012(2)
[9] 王志强,赵景礼,张宝优等.错层位巷道布置放顶煤开采关键层的稳定特征[J].煤炭学报,2008(9)
[10] 钱鸣高,许家林.覆岩采动裂隙分布的“O”形圈特征研究[J].煤炭学报,1998(5)