典型非金属材料表面粗糙度检测研究
|
摘要
非金属材料在我公司的产品中应用较为广泛,其表面粗糙度是一项重要的测量参数。非金属材料的产品形状各异,硬度也各不相同,与传统金属材料差别较大,目前传统的检测方法已不适用,需要对其检测方法进行研究。本文以三种典型材料为研究对象,对其表面粗糙度检测方法进行研究,探索出其最佳检测方法,并为其他非金属材料的表面粗糙度检测提供检测依据。
Non-metallic materials are widely used in our products, and their surface roughness is an important measurement parameter. The products of non-metallic materials have different shapes and hardness, which are different from tradition metal materials. Currently, the traditional detection methods need to be studied. In this paper, three typical non-metallic materials were used as the research objects to study its surface roughness detection method. It provides a basis for the detection of surface roughness of other non-metallic materials.
Non-metallic materials are widely used in our products, and their surface roughness is an important measurement parameter. The products of non-metallic materials have different shapes and hardness, which are different from tradition metal materials. Currently, the traditional detection methods need to be studied. In this paper, three typical non-metallic materials were used as the research objects to study its surface roughness detection method. It provides a basis for the detection of surface roughness of other non-metallic materials.
引文
[1]石米娜.基于分形几何的轴类零件表面粗糙度检测[D].长春:吉林大学,2007.
[2]郭便.表面粗糙度检测技术研究概况[J].价值工程,2011,30(8):50-51.
[3]中华人民共和国国家质量监督检验检疫总局.表面粗糙度参数及其数值:GB/T 1031-2009[S].2009.
[4]硫化橡胶国际硬度的测定:GB6032-85[S]. 1986.
[5]泰勒霍普森.PG1830粗糙度轮廓仪技术协议[Z].2010.
[2]郭便.表面粗糙度检测技术研究概况[J].价值工程,2011,30(8):50-51.
[3]中华人民共和国国家质量监督检验检疫总局.表面粗糙度参数及其数值:GB/T 1031-2009[S].2009.
[4]硫化橡胶国际硬度的测定:GB6032-85[S]. 1986.
[5]泰勒霍普森.PG1830粗糙度轮廓仪技术协议[Z].2010.