钨粉配炭混合新工艺的研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Research on a New Mixture Process of Tungsten Powder with Carbon 作者：谢勇才 ; 余碧荷 英文作者：XIE Yong-cai;YU Bi-he;Zigong Cemented Carbide Co.,Ltd; 关键词：双锥混合 ; 搅拌混合 ; 配炭工艺 ; 钨粉 ; 炭黑 ; 碳量分布均匀性 英文关键词：double cone mixing;;stirring mixing;;carbon addition;;tungsten powder;;carbon;;the uniformity of carbon distribution 中文刊名：XYJY 英文刊名：Rare Metals and Cemented Carbides 机构：四川自贡硬质合金有限责任公司; 出版日期：2018-12-20 出版单位：稀有金属与硬质合金 年：2018 期：v.46;No.229 语种：中文; 页：XYJY201806017 页数：4 CN：06 ISSN：43-1109/TF 分类号：97-100

摘要

采用双锥混合器和立式高速搅拌混合器进行钨粉配炭,研究了双锥混合+搅拌混合配炭新工艺各项参数对W+C混合料质量的影响,用极差分析法对W+C混合料碳量分布均匀性进行分析。结果表明,采用双锥混合+搅拌混合新工艺生产的W+C混合料碳量均匀性优于传统的球磨混合工艺。双锥混合器运转速度12r/min时,填充率50%和混合时间5h,双锥正、反向交替运转,搅拌混合4min可生产碳量均匀性好的W+C混合料。
        Tungsten powder was mixing with carbon by double cone mixer and vertical high speed mixer,the effects of parameters of the new carbon addition process by double cone mixing and stirring mixing on the quality of W+C mixture were studied,and the uniformity of carbon distribution in W + C mixture was analyzed by range analysis.The results show that the uniformity of carbon distribution of W+C mixture produced by double cone mixing and stirring mixing process is better than that of traditional ball milling mixing process.The W+C mixture with good carbon uniformity can be produced under the conditions of 12 r/min operating velocity,50%filling rate,5 hmixing time,alternating operation from positive to negative direction,and 4 min stir mixing time.

引文

[1]田建华.粗颗粒钨粉配碳新工艺的研究[J].硬质合金,2006,23(2):79-83.
    [2]何振娟,王录全,刘超红.粉末混料均匀性的影响因素及改善方法[C]∥川渝蓉粉末冶金技术交流会.2012.
    [3]陈文革.粉末混合质量的评定及影响因素[J].电工材料,1998(1):28-30.
    [4]江茂强.双锥型混合器内颗粒混合及增混机理研究[D].杭州:浙江大学,2010.