摘要
交联副产物释放过程的定量分析和去气工艺研究是高压交联电缆领域的技术难题,本文基于菲克第二定律和顶空气相色谱,采用数学建模和试验验证的方法,研究了影响副产物释放的各种因素,计算了高压交联电缆的去气时间。结果表明:副产物热释放过程主要取决于初始浓度、绝缘厚度、位置分布、去气时间和扩散系数,提高去气温度可以促进副产物的释放,采用低脱气绝缘料可有效缩短去气时间,绝缘厚度对去气时间的影响显著,采用顶空气相色谱法可验证实际去气效果。
The quantitative analysis of crosslinking by-products during release process and degassing process research are the technical problems of high-voltage crosslinked cable. Based on Fick's second law and headspace gas chromatography(HS-CG), the different factors influencing the release of by-products was studied by mathematical modeling and experimental verification, and the degassing time of high-voltage crosslinked cable was calculated. The results show that the heat release process of by-products mainly depends on the initial concentration, insulation thickness, position distribution, degassing time, and diffusion coefficient. Increasing the degassing temperature or using low degassing insulation material could promote the release of by-products and effectively reduce the degassing time. The influence of insulation thickness on the degassing time is significant. The actual degassing result could be verified by headspace gas chromatography.
引文
[1]ANDREWS T,HAMPTON R N,SMEDBERG A,et al.The role of desgassing in XLPE power cable manufacture[J].IEEE Electrical Insulation Magazine,2006,22(6):5-16.
[2]欧阳本红,赵健康,李欢,等.交联副产物对高压XLPE电缆绝缘介电和力学性能的影响[J].绝缘材料,2015,48(5):31-34.
[3]黄振,聂诗超,王锐,等.110kV XLPE电缆绝缘层内应力的测试方法与分析[J].绝缘材料,2017,50(6):64-68.
[4]许启发,石春静,叶丽花.超高压交联聚乙烯绝缘电缆副产物分析[C]//全国第九次电力电缆运行经验交流会.上海,2012:30-34.
[5]任虹光,武拥建.基于热失重法的高压交联电缆副产物释放研究[J].机械,2017,44(3):10-13.
[6]毛爱民,胥玉民,张进,等.超高压交联电缆绝缘脱气时间的研究[C]//中国电工技术学会电线电缆专业委员会“高压及超高压电缆技术”专题研讨会.佳木斯,2009:54-61.
[7]纪杰,邹健,孙亚斌,等.多次顶空-气袋法联用对甲烷气的定量[C]//第二十届全国色谱学术报告会及仪器展览会论文集(第四分册).西安,2015:220-222.