刀剪磨削微自动生产线的设计
|
摘要
为解决当前刀剪数控磨床加工时生产效率低、劳动强度大、质量不稳定等问题,设计了刀剪磨削微自动生产线。对这一生产线的总体布局、主要创新点、上下料装置、专用工装夹具及紧固装置进行了介绍。这一生产线可以有效提高刀剪的磨削效率,适用于刀剪磨削大批量生产。
In order to solve the current problems of low productivity, high labor intensity and unstable quality during processing of knives and scissors by NC grinder, a mini automatic production line for grinding of knives and scissors was designed. The overall layout, main innovations, loading and unloading devices,special fixtures and clamping device of this production line were introduced. This production line can effectively improve the grinding efficiency of the knives and scissors, and is suitable for mass grinding production of knives and scissors.
In order to solve the current problems of low productivity, high labor intensity and unstable quality during processing of knives and scissors by NC grinder, a mini automatic production line for grinding of knives and scissors was designed. The overall layout, main innovations, loading and unloading devices,special fixtures and clamping device of this production line were introduced. This production line can effectively improve the grinding efficiency of the knives and scissors, and is suitable for mass grinding production of knives and scissors.
引文
[1]刘守勇,李增平.机械制造工艺与机床夹具[M].3版.北京:机械工业出版社,2013.
[2]陈银清,任明,李凯,等.高精刀剪专用数控磨床设计[J].机械设计,2012,29(6):89-94.
[3]钟声宏,张秀洁,冯太欧.区域经济发展与特色产业塑造——以阳江五金刀剪业为例[J].经济问题探索,2007(1):58-61.
[4]雷玄,宋德奇.广东阳江成名符其实“中国刀剪之都”[J].中国质量万里行,2013,41(1):87-88.
[5]王子南.强化“双高”人才培养助力地方经济发展——基于“阳江市粤德合作职业教育与培训中心”的实例研究[J].新课程研究(中旬刊),2017(6):131-133.
[6]陈银清,李凯,任明,等.刀剪专用数控双头单面磨床的设计[J].机械制造,2016,54(10):15-18.
[7]华中工学院机械制造教研室.机床自动化与自动线[M].北京:机械工业出版社,1981.
[8]毛玉平.新型电磁吸盘的研究与设计[D].南京:南京理工大学,2004.
[9]吴宗泽.机械零件设计手册[M].北京:机械工业出版社2004.
[10]晏云海,蒋仕飞,刘凤,等.平面磨床小尺寸薄壁非磁性工件专用工装设计[J].新技术新工艺,2017(12):16-17.
[11]杨保健,张活俊,黄照辉.基于MCD的万向轮转向灵活性测试平台设计[J].机电工程技术,2018,47(1):48-50.
[12]韩征.数控机床工作台系统结构优化及其可靠性分析[D].沈阳:东北大学,2015.
[2]陈银清,任明,李凯,等.高精刀剪专用数控磨床设计[J].机械设计,2012,29(6):89-94.
[3]钟声宏,张秀洁,冯太欧.区域经济发展与特色产业塑造——以阳江五金刀剪业为例[J].经济问题探索,2007(1):58-61.
[4]雷玄,宋德奇.广东阳江成名符其实“中国刀剪之都”[J].中国质量万里行,2013,41(1):87-88.
[5]王子南.强化“双高”人才培养助力地方经济发展——基于“阳江市粤德合作职业教育与培训中心”的实例研究[J].新课程研究(中旬刊),2017(6):131-133.
[6]陈银清,李凯,任明,等.刀剪专用数控双头单面磨床的设计[J].机械制造,2016,54(10):15-18.
[7]华中工学院机械制造教研室.机床自动化与自动线[M].北京:机械工业出版社,1981.
[8]毛玉平.新型电磁吸盘的研究与设计[D].南京:南京理工大学,2004.
[9]吴宗泽.机械零件设计手册[M].北京:机械工业出版社2004.
[10]晏云海,蒋仕飞,刘凤,等.平面磨床小尺寸薄壁非磁性工件专用工装设计[J].新技术新工艺,2017(12):16-17.
[11]杨保健,张活俊,黄照辉.基于MCD的万向轮转向灵活性测试平台设计[J].机电工程技术,2018,47(1):48-50.
[12]韩征.数控机床工作台系统结构优化及其可靠性分析[D].沈阳:东北大学,2015.