TFT-LCD黑Gap分析及改善研究
|
摘要
黑Gap是大尺寸TFT-LCD产品常见的一种不良,它直接影响产品品质,降低产品竞争力。本文分析了黑Gap的发生原因及机理,指出面板放在卡夹中受到与卡夹接触点较强外力挤压后发生形变,柱状隔垫物受损,不能及时恢复导致黑Gap的发生。实验表明管控面板在卡夹中的存放时间,限制面板进行加热或降低加热温度,减少加热时间;增加面板与卡夹接触面积,减小面板与卡夹的接触角;增加柱状隔垫物与面板接触密度及辅助柱状隔垫物顶面柱径大小均可有效改善黑Gap。通过导入以上措施,使得黑Gap发生率由改善前的8.58%降低至0.1%,大大提高了产品品质。
Black Gap is a common defect in the production of large size TFT-LCD(Thin Film Transistor-Liquid Crystal Display).It directly deteriorates the quality of products and reduces the competition of products.The study shows that panel is extruded deformation by long time external force in cassette and the post spacer in cell is damaged and can't restore in time to result in black gap.To solve this issue,we can control the time of the panel in the cassette,confine oven process or reduce temperature and time properly,increase the contact area and decrease the contact angle between the cassette and panel,increase the contact density between post spacer and panel,and increase sub post spacer top CD respectively.All those actions decrease the black gap ratio from 8.58% to 0.1%,the quality of products has been greatly improved.
Black Gap is a common defect in the production of large size TFT-LCD(Thin Film Transistor-Liquid Crystal Display).It directly deteriorates the quality of products and reduces the competition of products.The study shows that panel is extruded deformation by long time external force in cassette and the post spacer in cell is damaged and can't restore in time to result in black gap.To solve this issue,we can control the time of the panel in the cassette,confine oven process or reduce temperature and time properly,increase the contact area and decrease the contact angle between the cassette and panel,increase the contact density between post spacer and panel,and increase sub post spacer top CD respectively.All those actions decrease the black gap ratio from 8.58% to 0.1%,the quality of products has been greatly improved.
引文
[1]杨迎春.液晶显示器应开拓大尺寸市场[J].现代显示,2011,22(7):29-31,45.YANG Y C.Design large size LCD panel for developing market prospects[J].Advanced Display,2011,22(7):29-31,45.(in Chinese)
[2]张明亮,黎海波,丁甲,等.TFT-LCD工艺中Gap性不良的分析与改善[J].电子世界,2017(19):64-66.ZHANG M L,LI H B,DING J,et al.Analysis and improvement of gap defect in TFT-LCD process[J].Electronics World,2017(19):64-66.(in Chinese)
[3]封宾,林鸿涛,王章涛,等.液晶面板Black-Gap不良的分析研究[C]//2012年中国平板显示会议论文集.深圳:中国物理学会,中国光学光电子行业协会,2012:247-250.FENG B,LIN H T,WANG Z T,et al.Analysis and research of TFT-LCD black-gap[C]//Proceedings of2012China Display Conference.Shenzhen:Chinese Physics Society,China Optical Optoelectronic Industry Association,2012:247-250.(in Chinese)
[4]马群刚.TFT-LCD原理与设计[M].北京:电子工业出版社,2011.MA Q G.Principle and Design of TFT-LCD[M].Beijing:Publishing House of Electronics Industry,2011.(in Chinese)
[5]张晶思.在液晶滴下工艺中保持盒厚均一性的研究[D].上海:上海交通大学,2009.ZHANG J S.Disquisition of how to make cell gap unfirm in ODF Process[D].Shanghai:Shanghai Jiao Tong University,2009.(in Chinese)
[6]顾俊,常翔宇,许军.利用光刻胶支柱控制柔性液晶盒厚的方法[J].复旦学报:自然科学版,2012,51(6):746-750.GU J,CHANG X Y,XU J.Cell gap controlling of the flexible LCD cell using photoresist materials[J].Journal of Fudan University(Natural Science),2012,51(6):746-750.(in Chinese)
[7]CHEN S H,KOO H S,CHEN W Y,et al.Advanced photo spacer technology for large-sized TFT-LCD[J].SID Symposium Digest of Technical Papers,2005,36(1):539-541.
[8]陈彩琴.基于HTM技术的PS优化设计研究[D].广东:华南理工大学,2017.CHEN C Q.Optimization design of photo spacer based on HTM technology[D].Guangdong:South China University of Technology,2017.(in Chinese)
[9]于涛,陈晟,储培鸣,等.新型TFT-LCD柱状隔垫物的形变研究[J].液晶与显示,2012,27(4):445-447.YU T,CHEN S,CHU P M,et al.Deformation of new photo-spacer for TFT-LCD[J].Chinese Journal of Liquid Crystals and Displays,2012,27(4):445-447.(in Chinese)
[2]张明亮,黎海波,丁甲,等.TFT-LCD工艺中Gap性不良的分析与改善[J].电子世界,2017(19):64-66.ZHANG M L,LI H B,DING J,et al.Analysis and improvement of gap defect in TFT-LCD process[J].Electronics World,2017(19):64-66.(in Chinese)
[3]封宾,林鸿涛,王章涛,等.液晶面板Black-Gap不良的分析研究[C]//2012年中国平板显示会议论文集.深圳:中国物理学会,中国光学光电子行业协会,2012:247-250.FENG B,LIN H T,WANG Z T,et al.Analysis and research of TFT-LCD black-gap[C]//Proceedings of2012China Display Conference.Shenzhen:Chinese Physics Society,China Optical Optoelectronic Industry Association,2012:247-250.(in Chinese)
[4]马群刚.TFT-LCD原理与设计[M].北京:电子工业出版社,2011.MA Q G.Principle and Design of TFT-LCD[M].Beijing:Publishing House of Electronics Industry,2011.(in Chinese)
[5]张晶思.在液晶滴下工艺中保持盒厚均一性的研究[D].上海:上海交通大学,2009.ZHANG J S.Disquisition of how to make cell gap unfirm in ODF Process[D].Shanghai:Shanghai Jiao Tong University,2009.(in Chinese)
[6]顾俊,常翔宇,许军.利用光刻胶支柱控制柔性液晶盒厚的方法[J].复旦学报:自然科学版,2012,51(6):746-750.GU J,CHANG X Y,XU J.Cell gap controlling of the flexible LCD cell using photoresist materials[J].Journal of Fudan University(Natural Science),2012,51(6):746-750.(in Chinese)
[7]CHEN S H,KOO H S,CHEN W Y,et al.Advanced photo spacer technology for large-sized TFT-LCD[J].SID Symposium Digest of Technical Papers,2005,36(1):539-541.
[8]陈彩琴.基于HTM技术的PS优化设计研究[D].广东:华南理工大学,2017.CHEN C Q.Optimization design of photo spacer based on HTM technology[D].Guangdong:South China University of Technology,2017.(in Chinese)
[9]于涛,陈晟,储培鸣,等.新型TFT-LCD柱状隔垫物的形变研究[J].液晶与显示,2012,27(4):445-447.YU T,CHEN S,CHU P M,et al.Deformation of new photo-spacer for TFT-LCD[J].Chinese Journal of Liquid Crystals and Displays,2012,27(4):445-447.(in Chinese)