超深浮式钻井绞车型升沉补偿系统绞车体结构设计
|
摘要
介绍一种超深浮式钻井绞车型升沉补偿系统的原理。对绞车体进行了参数计算和结构设计,采用Solid Works建立了绞车体的三维实体模型,利用ANSYS Workbench进行了绞车体的有限元分析。结果表明:结构布局合理,结构强度符合静力学要求。研究结果将为绞车型升沉补偿系统的结构设计提供参考。
The principle of a ultra-deep drilling winch-type heave compensation system was introduced. The parameter calculation and structure design of the winch body were carried out,the three-dimensional model of the winch body was drawn by Solid Works CAD software,and ANSYS Workbench was used to make finite element analysis with winch body. The results shows that the design process is correct,the structure of the layout is reasonable and structural strength meets the requirements of statics. The results will provide the basis for the design of the structure of the winch type heave compensation system.
The principle of a ultra-deep drilling winch-type heave compensation system was introduced. The parameter calculation and structure design of the winch body were carried out,the three-dimensional model of the winch body was drawn by Solid Works CAD software,and ANSYS Workbench was used to make finite element analysis with winch body. The results shows that the design process is correct,the structure of the layout is reasonable and structural strength meets the requirements of statics. The results will provide the basis for the design of the structure of the winch type heave compensation system.
引文
[1]肖体兵,洪永,葛友明,等.超深浮式钻井多功能节能型升沉补偿绞车.中国专利:CN204454376U[P].2015-07-08.
[2]葛友明.超深钻井作业绞车型升沉补偿系统的设计和仿真[D].广州:广东工业大学,2015.
[3]张质文,虞和谦,王金诺,等.起重机设计手册[M].北京:中国铁道出版社,1998.
[4]陆爽,孙明礼,丁金福,等.ANSYS Workbench 13.0有限元分析从入门到精[M].北京:机械工业出版社,2012.
[5]陈思祥,杨秀菊,李云鹏.基于ANSYS的JC-120DB绞车滚筒强度分析[J].装备制造技术,2013(9):96-97.CHEN Sixiang,YANG Xiuju,LI Yunpeng.The Intensity Analysis of JC-120 DB Draw Works Based on ANSYS[J].Equipment Manufacturing Technology,2013(9):96-97.
[6]赖笑辉,牟新明,李鹏.绞车滚筒的结构强度分析[J].现代制造技术与装备,2009(2):70-72.LAI Xiaohui,MU Xinming,LI Peng.Analysis of Structural Strength of the Drum Spool[J].Modern Manufacturing Technology and Equipment,2009(2):70-72.
[7]杨厚华.层间过渡时钢绳对滚筒轮缘的挤压力[J].现代机械,2000(1):73-75.
[2]葛友明.超深钻井作业绞车型升沉补偿系统的设计和仿真[D].广州:广东工业大学,2015.
[3]张质文,虞和谦,王金诺,等.起重机设计手册[M].北京:中国铁道出版社,1998.
[4]陆爽,孙明礼,丁金福,等.ANSYS Workbench 13.0有限元分析从入门到精[M].北京:机械工业出版社,2012.
[5]陈思祥,杨秀菊,李云鹏.基于ANSYS的JC-120DB绞车滚筒强度分析[J].装备制造技术,2013(9):96-97.CHEN Sixiang,YANG Xiuju,LI Yunpeng.The Intensity Analysis of JC-120 DB Draw Works Based on ANSYS[J].Equipment Manufacturing Technology,2013(9):96-97.
[6]赖笑辉,牟新明,李鹏.绞车滚筒的结构强度分析[J].现代制造技术与装备,2009(2):70-72.LAI Xiaohui,MU Xinming,LI Peng.Analysis of Structural Strength of the Drum Spool[J].Modern Manufacturing Technology and Equipment,2009(2):70-72.
[7]杨厚华.层间过渡时钢绳对滚筒轮缘的挤压力[J].现代机械,2000(1):73-75.