某油田钻铤断裂失效原因分析
|
摘要
某油田钻井队在空气钻井过程中发生一起钻铤断裂失效事故。采用宏观观察、化学成分分析、力学性能试验、硬度测试、金相检验、微观观察等方法对钻铤断裂失效的原因进行了分析。结果表明:钻铤螺纹接头与钻铤尺寸不匹配,内螺纹接头处为薄弱环节,在空气钻井过程中发生了疲劳断裂。建议采用与钻铤尺寸匹配的螺纹接头,并在钻铤接头部位增加应力分散槽,或者使用双台肩接头钻铤。
A drilling team in an oil field had a drill collar fracture failure accident during air drilling process.The causes of fracture failure of the drill collar were analyzed by means of macro observation,chemical composition analysis,mechanical property test,hardness test,metallographic examination,micro observation and so on.The results show that the thread joint of the drill collar did not match the size of the drill collar.The internal thread joint was a weak link and fatigue fracture occurred during air drilling process.It is suggested to adopt thread joint matching the size of the drill collar and to add stress dispersion grooves at the joint of the drill collar,or to use double shoulder joint drill collar.
A drilling team in an oil field had a drill collar fracture failure accident during air drilling process.The causes of fracture failure of the drill collar were analyzed by means of macro observation,chemical composition analysis,mechanical property test,hardness test,metallographic examination,micro observation and so on.The results show that the thread joint of the drill collar did not match the size of the drill collar.The internal thread joint was a weak link and fatigue fracture occurred during air drilling process.It is suggested to adopt thread joint matching the size of the drill collar and to add stress dispersion grooves at the joint of the drill collar,or to use double shoulder joint drill collar.
引文
[1]朱江,王萍,蔡利山,等.空气钻井技术及其应用[J].石油钻采工艺,2007,30(2):145-148.
[2]袁鹏斌,吕拴录,孙丙向,等.空气钻井过程中钻杆断裂原因分析[J].石油钻采工艺,2008,30(5):34-37.
[3]王文龙,赵勤,李子丰,等.普光气田气体钻井钻具失效原因分析及预防措施[J].石油钻采工艺,2008,30(5):38-43.
[4]廖忠会,张杰,李群生,等.气体钻井断钻铤事故的原因分析及预防[J].石油钻采工艺,2007,30(6):6-8.
[5]钟群鹏,赵子华.断口学[M].北京:高等教育出版社,2006.
[6]王志晴,田增,杜志杰.某油田钻铤内螺纹接头断裂原因分析[J].理化检验(物理分册),2016,52(7):494-498.
[7]刘强,万朝晖,吕依依,等.某钻铤断裂原因分析[J].理化检验(物理分册),2016,52(5):328-331.
[8]窦金永,宋瑞宏.国内外气体钻井发展历程及现状[J].西部探矿工程,2010(12):67-69.
[9]祝效华,蒋祖军,童华,等.气体钻井钻具失效因素与机理分析[J].石油钻探技术,2009,37(2):60-62.
[2]袁鹏斌,吕拴录,孙丙向,等.空气钻井过程中钻杆断裂原因分析[J].石油钻采工艺,2008,30(5):34-37.
[3]王文龙,赵勤,李子丰,等.普光气田气体钻井钻具失效原因分析及预防措施[J].石油钻采工艺,2008,30(5):38-43.
[4]廖忠会,张杰,李群生,等.气体钻井断钻铤事故的原因分析及预防[J].石油钻采工艺,2007,30(6):6-8.
[5]钟群鹏,赵子华.断口学[M].北京:高等教育出版社,2006.
[6]王志晴,田增,杜志杰.某油田钻铤内螺纹接头断裂原因分析[J].理化检验(物理分册),2016,52(7):494-498.
[7]刘强,万朝晖,吕依依,等.某钻铤断裂原因分析[J].理化检验(物理分册),2016,52(5):328-331.
[8]窦金永,宋瑞宏.国内外气体钻井发展历程及现状[J].西部探矿工程,2010(12):67-69.
[9]祝效华,蒋祖军,童华,等.气体钻井钻具失效因素与机理分析[J].石油钻探技术,2009,37(2):60-62.