PLC控制气动挠度检测装置设计
|
摘要
介绍一套混凝土空腔构件挠度的自动检测装置。利用气缸对产品的上表面中心区域施加载荷,并用传感器测量产品上表面对应位置的位移。对照设计出的三维模型,阐述装置的组成结构、气动原理和PLC控制系统。该装置对产品挠度的检测具有较强的实用性。
A set of automatic detection device for concrete hollow components' deflection was introduced. Cylinders were used to apply load on central areas of products' upper surface,and a sensor was used to measure the displacement of the upper surface's corresponding location. Compared with the three-dimensional model,the structure and the pneumatic principle and the PLC control system were stated. The device has great practicability in products' deflection testing.
A set of automatic detection device for concrete hollow components' deflection was introduced. Cylinders were used to apply load on central areas of products' upper surface,and a sensor was used to measure the displacement of the upper surface's corresponding location. Compared with the three-dimensional model,the structure and the pneumatic principle and the PLC control system were stated. The device has great practicability in products' deflection testing.
引文
[1]王兴肖,李保德,李晶晶.现浇钢筋混凝土密肋空腔楼盖力学性能与计算方法[J].华中科技大学学报(城市科学版),2009,26(4):76-79.WANG X X,LI B D,LI J J.Mechanical Properties and Calculation Method of Cast-in-place Reinforced Concrete Dense Rib Cavity Ceiling[J].Journal of Huazhong University of Science and Technology(Urban Science Edition),2009,26(4):76-79
[2]刘庆花.基于PLC的自动切料生产线气动装置的设计[J].液压与气动,2015(8):94-96.LIU Q H.Design of Automatic Cutting Device Based on PLC[J].Chinese Hydraulics&Pneumatics,2015(8):94-96.
[3]朱峰,林吉靓.CZC-1型自动叠片机传动部分的设计及控制[J].机床与液压,2016,44(10):100-103.ZHU F,LIN J J.Transmission Design and Control for CZC-1Type Automatic Lamination Machine[J].Machine Tool&Hydraulics,2016,44(10):100-103.
[4]关明,周希伦,马立静,等.基于PLC的机械手控制系统设计[J].制造业自动化,2012,34(7):120-121.GUAN M,ZHOU X L,MA L J,et al.Control System Design of Manipulator Based on PLC[J].Manufacturing Automation,2012,34(7):120-121.
[5]李丽霞,刘志伟,陈庆华,等.基于FESTO自动搬运物流分拣系统设计[J].机床与液压,2016,44(10):19-22.LI L X,LIU Z W,CHEN Q H,et al.Design of Automatic Portage Logistics Sorting System Based on FESTO[J].Machine Tool&Hydraulics,2016,44(10):19-22.
[6]冯汛,倪红军,石健,等.PLC的应用发展与前景[J].机床与液压,2016,44(2):203-206.FENG X,NI H J,SHI J,et al.Application Development and Prospects of PLC[J].Machine Tool&Hydraulics,2016,44(2):203-206.
[7]李金城,付明忠.三菱FX系列PLC定位控制应用技术[M].北京:电子工业出版社,2014.
[8]杨青杰,李国厚,周强.三菱FX系列PLC应用系统设计指南[M].北京:机械工业出版社,2008.
[9]郭艳萍,张超英.基于PLC的工业机械手控制系统[J].仪表技术与传感器,2007(9):31-32.GUO Y P,ZHANG C Y.Control System of Industrial Manipulator Based on PLC[J].Instrument Technique and Sensor,2007(9):31-32.
[10]李响初,蔡晓春,银奕淇,等.图解三菱FX、变频器与触摸屏综合应用[M].北京:机械工业出版社,2013.
[2]刘庆花.基于PLC的自动切料生产线气动装置的设计[J].液压与气动,2015(8):94-96.LIU Q H.Design of Automatic Cutting Device Based on PLC[J].Chinese Hydraulics&Pneumatics,2015(8):94-96.
[3]朱峰,林吉靓.CZC-1型自动叠片机传动部分的设计及控制[J].机床与液压,2016,44(10):100-103.ZHU F,LIN J J.Transmission Design and Control for CZC-1Type Automatic Lamination Machine[J].Machine Tool&Hydraulics,2016,44(10):100-103.
[4]关明,周希伦,马立静,等.基于PLC的机械手控制系统设计[J].制造业自动化,2012,34(7):120-121.GUAN M,ZHOU X L,MA L J,et al.Control System Design of Manipulator Based on PLC[J].Manufacturing Automation,2012,34(7):120-121.
[5]李丽霞,刘志伟,陈庆华,等.基于FESTO自动搬运物流分拣系统设计[J].机床与液压,2016,44(10):19-22.LI L X,LIU Z W,CHEN Q H,et al.Design of Automatic Portage Logistics Sorting System Based on FESTO[J].Machine Tool&Hydraulics,2016,44(10):19-22.
[6]冯汛,倪红军,石健,等.PLC的应用发展与前景[J].机床与液压,2016,44(2):203-206.FENG X,NI H J,SHI J,et al.Application Development and Prospects of PLC[J].Machine Tool&Hydraulics,2016,44(2):203-206.
[7]李金城,付明忠.三菱FX系列PLC定位控制应用技术[M].北京:电子工业出版社,2014.
[8]杨青杰,李国厚,周强.三菱FX系列PLC应用系统设计指南[M].北京:机械工业出版社,2008.
[9]郭艳萍,张超英.基于PLC的工业机械手控制系统[J].仪表技术与传感器,2007(9):31-32.GUO Y P,ZHANG C Y.Control System of Industrial Manipulator Based on PLC[J].Instrument Technique and Sensor,2007(9):31-32.
[10]李响初,蔡晓春,银奕淇,等.图解三菱FX、变频器与触摸屏综合应用[M].北京:机械工业出版社,2013.