V_2O_3产品中硫含量影响因素研究
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:STUDY ON INFLUENCING FACTORS OF SULFUR CONTENT IN V_2O_3 PRODUCT
  • 作者:刘学文
  • 英文作者:LIU Xuewen;Pangang Group Vanadium & Titanium Resources Co., Ltd.;
  • 关键词:三氧化二钒 ; 多钒酸铵 ; ; 温度 ; 还原
  • 英文关键词:V_2O_3;;APV;;sulfur;;temperature;;reduction
  • 中文刊名:THJN
  • 英文刊名:Ferro-Alloys
  • 机构:攀钢集团钒钛资源股份有限公司;
  • 出版日期:2019-06-24
  • 出版单位:铁合金
  • 年:2019
  • 期:v.50;No.278
  • 语种:中文;
  • 页:THJN201903008
  • 页数:4
  • CN:03
  • ISSN:22-1145/TF
  • 分类号:31-34
摘要
对采用焦炉煤气还原多钒酸铵(APV)制取V_2O_3产品中S含量的影响因素进行了研究,得到了不同S含量的V_2O_3产品。试验结果表明:在APV硫含量0.55%、还原温度800℃、还原时间20 min、煤气流量20 L/h的条件下能够得到S≤0.04%的V_2O_3产品。通过降低APV的S含量、还原过程中翻动物料和对温度、时间的控制可以得到S含量更低的V_2O_3产品。在实际生产中,可以通过调节APV的洗涤程度,控制还原温度和时间,得到不同S含量的V_2O_3产品,满足不同钒合金生产要求,达到节约成本的目的。
        The factors affecting the content of S in V_2O_3 products prepared by coke oven gas reduction of ammonium polyvanadate(APV) were studied. Different sulfur content V_2O_3 product were obtained. The test results show that V_2O_3 products with S≤0.04% can be obtained under the conditions of APV sulfur content 0.55%, reduction temperature 800 ℃, reduction time 20 min, gas flow rate 20 L/h. V_2O_3 products with lower S content can be obtained by reducing the S content of APV, turning over materials during the reduction process, and controlling temperature and time. In actual production, V_2O_3 products with different S contents can be obtained by adjusting the washing degree of APV, controlling the reduction temperature and time. It can meet various requirements of vanadium alloy production and saving cost.
引文
[1] 陈海军,孙朝晖,尹丹凤,等.回转窑生产V2O3工业试验研究[J]钢铁钒钛,2013,34(2):16-18.
    [2] 连忠华.大型化还原回转窑生产V2O3的技术研究[J]铁合金,2013,44(2):11-16.
    [3] 张帆,孙朝晖,鲜勇,等.还原工艺对V2O3产品中TV的影响研究[J]铁合金,2012,43(6):12-15.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700