摘要
从镀液中铬酸酐与硫酸的质量浓度比、三价铬含量、金属杂质含量、硝酸根离子含量、温度、阳极导电性等方面分析了某端盖产品电镀装饰铬光亮度不足的原因。通过现场调研和分析进行排查,确定了铬酸酐与硫酸的质量浓度比偏高、三价铬含量过高、金属杂质混入以及阳极导电不良是主要原因。采取相应的措施后成功解决了问题。
The causes of poor brightness defect for decorative chromium coating on a type of end cap were analyzed from several respects including mass concentration ratio of chromic anhydride to sulfuric acid, trivalent chromium ion content, metal impurity content, nitrate ion content, bath temperature, and anode's conductivity. The results of site investigation and analysis showed that the main causes were as follows: too high mass concentration ratio of chromic anhydride to sulfuric acid, too many of trivalent chromium ions, contamination with metal impurities, and poor conductivity of anode. The problem was solved successfully by taking some corresponding measures.
引文
[1]谢无极.电镀故障精解[M].2版.北京:化学工业出版社,2013.
[2]白祯遐,任星明.CS型稀土镀铬添加剂的应用体会[J].表面技术,2000,29(2):41-42.
[3]张三元,张磊.电镀层均匀性和镀液稳定性──问题与对策[M].北京:化学工业出版社,2010.
[4]胡瑞华,霍大勇.几何因素影响镀硬铬层均匀性的分析[J].电镀与涂饰,2017,36(13):711-714.
[5]霍大勇.温度对电镀光亮镍影响分析[J].电镀与精饰,2015,37(6):28-30.
[6]王照国,陆兴华.铜基体镀铬的工艺实践[J].科技信息,2014(2):275-276.