摘要
以抗拉强度为1 000 MPa级的汽车用冷轧双相钢为对象,采用电化学充氢和恒载荷拉伸试验方法,研究了材料在不同应力和充氢条件下的延迟断裂行为以及材料延迟断裂门槛应力与氢浓度之间的关系。结果表明,在充氢条件下材料延迟断裂时间随着应力的增大而缩短,延迟断裂的门槛应力随着充氢电流密度增大而下降,延迟断裂门槛应力与临界可扩散氢浓度的对数呈线性关系。
The hydrogen-induced delayed fracture behavior of high strength cold-rolled dual phase steel was studied using electrochemical hydrogen charging and constant load test,the threshold stress and the relationship between the stress and the hydrogen content were investigated. The results showed that the time to delayed fracture reduced with the increase of the applied load,the threshold stress declined with the increase of charging current density,and the threshold stress is linear relationship with the natural logarithm of the critical diffusible hydrogen content.
引文
[1]WANG Li,JIN Xinyan,ZHONG Yong.Development of hot-dip galvanized AHHS in Baosteel[C]//9th international conference on zinc and zinc alloy coated steel sheet,2013:49-54.
[2]Shingo Yamaska,Manabu Kubota,Toshimi Tarui.Evaluation method for delayed fracture susceptibility of steels and development of high strength steels with high delayed fracture resistance[J].Nippon steel technical report,1999,80:50-55.
[3]Kimura Y,Sakai Y,Hara T.Hydrogen induced delayed fracture of ultrafine grained 0.6%steel with dispersed oxide particles[J].Scripta Materialia,2003,49:1111-1116.
[4]WANG Y,CHU W Y,QIAO L J,et al.Hydrogen-induced delayed fracture of PZT ceramics during dynamic charging under constant load[J].Mat Sci Eng B,2003,98:1-5.