标识和追溯性管理在民用飞机项目中的应用
|
摘要
标识是追溯性管理的基础。从标识和追溯性的定义出发,介绍了民机设计和制造过程中标识要求的相关标准;结合民机制造和管理特点,介绍了民机标识内容的基本要求,民机标识方法的选用原则,并详细说明了民机常用的标识方法;针对民机系统目前所采用标识方法存在的问题,阐述了二维码技术在民机标识和追溯性管理中的应用优势。
Identification is the basis of traceability management. Beginning with definition of identification,this paper introduces relevant standards for identification requirements in civil aircraft design and manufacturing process. Combined with the characteristics of civil aircraft manufacturing and management,the basic requirements of civil aircraft identification content,the selection principle of civil aircraft identification method are introduced,and the commonly used identification methods of civil aircraft are described in detail. In view of the existing problem in the identification methods adopted in civil aircraft system,the application advantages of two dimensional code technology in civil aircraft identification and traceability management are expounded.
Identification is the basis of traceability management. Beginning with definition of identification,this paper introduces relevant standards for identification requirements in civil aircraft design and manufacturing process. Combined with the characteristics of civil aircraft manufacturing and management,the basic requirements of civil aircraft identification content,the selection principle of civil aircraft identification method are introduced,and the commonly used identification methods of civil aircraft are described in detail. In view of the existing problem in the identification methods adopted in civil aircraft system,the application advantages of two dimensional code technology in civil aircraft identification and traceability management are expounded.
引文
[1]贺璐,张乐.民用飞机构型标识方法[J].民用飞机设计与研究,2015(3):47-51.
[2]国家质量技术监督局.产品标识标注规定[S]. 1997.
[3]朱彩云,牛少红.军工产品“铭牌”与“标牌”的性质和关系辨析[J].航天标准化,2014(2):42-46.
[4]蒋利民,田中群,刘柱方,等.金属的电化学微区刻蚀方法[J].电化学,2002(2):139-147.
[5]ERNST P. Enterprise Resource Planning(ERP)and Manufacturing Execution Systems(MES)[J]. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb,2008,103(4):271-275.
[6]贺东风,赵越让,钱仲焱,等.中国商用飞机有限责任公司系统工程手册[M].上海:上海交通大学出版社,2017.
[7]严春惠子.冷态车轮钢坯标识识别系统研究[D].马鞍山:安徽工业大学,2016.
[8]纪红任,谢凤宽,张文俊,等.基于二维条码技术的应急物资标识及其应急物流模式研究[J].物流技术,2010,29(19):4-6.
[2]国家质量技术监督局.产品标识标注规定[S]. 1997.
[3]朱彩云,牛少红.军工产品“铭牌”与“标牌”的性质和关系辨析[J].航天标准化,2014(2):42-46.
[4]蒋利民,田中群,刘柱方,等.金属的电化学微区刻蚀方法[J].电化学,2002(2):139-147.
[5]ERNST P. Enterprise Resource Planning(ERP)and Manufacturing Execution Systems(MES)[J]. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb,2008,103(4):271-275.
[6]贺东风,赵越让,钱仲焱,等.中国商用飞机有限责任公司系统工程手册[M].上海:上海交通大学出版社,2017.
[7]严春惠子.冷态车轮钢坯标识识别系统研究[D].马鞍山:安徽工业大学,2016.
[8]纪红任,谢凤宽,张文俊,等.基于二维条码技术的应急物资标识及其应急物流模式研究[J].物流技术,2010,29(19):4-6.